Resistive random-access memory (ReRAM) is expected to be the next-generation non-volatile memory device because of its fast operation speed and low power consumption. Switching media in most ReMAM are oxides which are rigid and require high-temperature processing. Here, we review two emerging types of low-cost solution-processed ReRAMs with sandwich structures: one is hybrid nanocomposites with charge-trapping nanoparticles (NPs) embedded in a polymer matrix, and the other is hybrid halide perovskites which have been intensively investigated recently for optoelectronic applications. We will review the recent developments in materials selection, device performance and operation mechanisms. Resistive switching in hybrid materials and composites is ubiquitous because of the abundant existence of charge-trapping defects and interfaces. The future challenges and potential breakthroughs will also be outlined.

Presently, chemical agents remain the main antimildew agents for bamboo, which has a certain negative impact on the environment and human health. Therefore, it is urgent to develop new environment-friendly antimildew agents for bamboo. Here, citral, an environment-friendly natural antibacterial agent, was used as an antimildew agent for bamboo. The orthogonal test was used to explore the effects of citral concentration, impregnation pressure, and pressurization time on the drug loading capacity of treated bamboo strips. The effect of antimildew-treated bamboo strips on bamboo mold was also discussed. Furthermore, the Fourier transform infrared spectroscopy and ultraviolet spectrophotometer were used to investigate the distribution of citral in bamboo strips. Results showed that the optimum technological parameters of citral mildew-proof treatment of bamboo were as follows: citral concentration: 0.795 mg/ml, impregnation pressure: 0.3 MPa, and pressurization time: 90 min. Also, citral was easy to volatilize, which decreased the citral content of bamboo strips after vacuum drying and showed the trend of a lower surface layer and a higher inner layer. The concentration of citral therefore had a significant effect on the drug loading of the antimildew-treated bamboo strips. Thus, it was difficult to achieve effective prevention and control of bamboo mold when bamboo strips were impregnated with a lower concentration of citral solution. When the concentration of citral reached 200 mg/ml, the prevention and antimold efficiency of antimildew bamboo strips reached over 100%. This study will provide references for the development and application of environment-friendly natural antibacterial agents in the field of bamboo mildew prevention.

Bamboo has been widely used in architecture, decoration and other fields because of its advantages of short growth period, high strength and degradability. However, bamboo, as a combustible material like wood, are easy to burn and cause building fires. However, the existing bamboo water-based flame retardants have some shortcomings, such as strong hygroscopicity and easy loss, which limits the application of bamboo products. In order to improve the flame retardant performance of bamboo, CaAl-SiO2 layered double hydroxide (LDH) as bamboo flame retardant was synthesised by coprecipitation method. The influence of preparation technology on CaAl–SiO3–LDH structures and properties as well as the flame retardant and smoke suppression characteristics of flame retardant-treated bamboo was discussed. The results revealed that the crystallisation temperature, crystallisation time and crystallisation concentration of CaAl–SiO3–LDHs considerably affected its structure and properties. The optimum technological parameters for preparing CaAl–SiO3–LDHs by using the coprecipitation method are as follows: crystallisation temperature of 100 °C, crystallisation time of 9 h and Ca2+ solution molar concentration of 0.33 mol/L. Compared with nonflame-retardant wood, CaAl–SiO3–LDH flame retardant treatment delayed the peak time of the heat release rate by 20 s and the ignition time by 77.78% and increased the carbon residue rate by 9.54%. This study can provide reference for the research of new flame retardant for bamboo products.

To reduce the amount of citral used without reducing the antimildew performance of bamboo, the citral compound preparation process, the distribution of the compound in bamboo, and its antimildew performance were investigated using the Oxford cup method, Fourier-transform infrared spectroscopy, and ultraviolet spectrophotometry. The results revealed that the combination of citral with cinnamaldehyde or thymol may lead to partial chemical reactions, which may change the chemical structure of citral and affect its bacteriostatic properties. The bacteriostatic properties of the citraldehyde thymol compound against common molds of bamboo were considerably superior to those of the citral cinnamaldehyde compound. The limonaldehyde thymol compound showed a low distribution trend outside and vice versa inside in the treated bamboo. The citral thymol compound exhibited good antimildew performance at a concentration of 200 mg/mL. The citral thymol compound could reduce the amount of citral by approximately 67 mg/mL without reducing the antimildew performance of bamboo.