Geopolymers, as a kind of inorganic polymer, possess excellent properties and have been broadly studied for the stabilization/solidification (S/S) of hazardous pollutants. Even though many reviews about geopolymers have been published, the summary of geopolymer-based S/S for various contaminants has not been well conducted. Therefore, the S/S of hazardous pollutants using geopolymers are comprehensively summarized in this review. Geopolymer-based S/S of typical cations, including Pb, Zn, Cd, Cs, Cu, Sr, Ni, etc., were involved and elucidated. The S/S mechanisms for cationic heavy metals were concluded, mainly including physical encapsulation, sorption, precipitation, and bonding with a silicate structure. In addition, compared to cationic ions, geopolymers have a poor immobilization ability on anions due to the repulsive effect between them, presenting a high leaching percentage. However, some anions, such as Se or As oxyanions, have been proved to exist in geopolymers through electrostatic interaction, which provides a direction to enhance the geopolymer-based S/S for anions. Besides, few reports about geopolymer-based S/S of organic pollutants have been published. Furthermore, the adsorbents of geopolymer-based composites designed and studied for the removal of hazardous pollutants from aqueous conditions are also briefly discussed. On the whole, this review will offer insights into geopolymer-based S/S technology. Furthermore, the challenges to geopolymer-based S/S technology outlined in this work are expected to be of direct relevance to the focus of future research.

Efficient and selective removal of 90Sr is an important process for the safe use of nuclear energy. Herein, we investigate and assess the Sr2+ adsorption properties of a metal-organic framework UiO-66-(COOH)2 functionalized by non-bonded carboxylic groups. This MOF is an exciting class of free carboxylic functionalized MOFs that combine chemical stability with gas sorption, dye elimination, and conductivity. Specifically, we show that uniformly distributed carboxyl and water stability make it accessible for loading Sr2+ without structural changes. The FTIR spectroscopy, PXRD analysis, XPS, and SEM-EDS studies show excellent stability as well as the strong affinity between -COOH active site and Sr2+. This strong coordination interaction guarantees a high adsorption capacity of 114 mg g−1 within 5 h (pH 5 and 298 K). Combined kinetic and thermodynamic studies show that the surface complexation is strong chemisorption and cost-effective spontaneous process (ΔG = −5.49 kJ mol−1~−2.16 kJ mol−1). The fact that UiO-66-(COOH)2 not only possesses a high adsorption capacity, but also enables selectivity to Sr2+ in the presence of similar radius ions Na+ and K+, prefigures its great potential for the practical treatment of radioactive Sr2+ in polluted water.

The mass production of flotation tailings has become a serious risk to the environment. Re-concentration of tailings is one of the best ways to solve this problem, which requires a better understanding of flotation tailings. In the present work, flotation kinetics, timed-release flotation, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and solid-state nuclear magnetic resonance (SSNMR) were used to analyze the properties of flotation tailings with different particle sizes and densities, the occurrence and binding state of gangue minerals in tailing, and the transportation behaviors in the re-flotation process. Flotation results showed that the flotation yield exhibited little change with the extension of flotation time, while the ash content of the froth concentrates increased. An increase of the flotation time could reduce the ash content of the obtained product. The characterization results confirmed that the main gangue minerals in the tailings were kaolinite and quartz. With the decrease of particle size or the increase of floating and sinking density, the contents of kaolinite and quartz increased. However, due to the different dissemination characteristics of kaolinite and quartz in the tailings, the distributions of kaolinite and quartz in the different particle sizes and densities of tailing had differences. Although both kaolinite and quartz could exist as monomers, kaolinite was more easily associated with coal. Based on the above cognition, a new flotation method is proposed for coal flotation tailing. A part of the concentrates in the early stage of flotation should be scraped out quickly. Then, the concentrates obtained in the later stage of flotation are collected and merged into the concentrates obtained during the early stage of flotation, while the secondary tailing is directly pumped into the raw feed system.

The objective of this work is to present the research progress and applications of fly ash-based geopolymer, and summarize the future research hotpots. Since 1998, scholars have made important contributions to the study of fly ash-based geopolymer, and a large number of research studies have been published. Therefore, a bibliometric analysis for the determination of the research status, trend, and history of fly ash-based geopolymer was conducted in the present study. A total of 4352 publications on fly ash-based geopolymer were collected between 1998 and 2022, with an increasing trend year by year. China and Australia are the largest contributors to the field, and the research institutions in each country cooperate closely. In addition, the most contributing research areas are MATERIALS SCIENCE, ENGINEERING, and CONSTRUCTION & BUILDING TECHNOLOGY. The keywords including fly ash, compressive strength, and mechanical property are the most frequently appearing words. On the whole, the development of fly ash-based geopolymer could be divided into three stages including the replacement of ordinary Portland cement, the development of multifunctional materials, and the reduction of environmental impact by the conversion of solid waste. This overview could provide an important guidance for the development of fly ash-based geopolymer.

No abstract