6to4Provider Managed Tunnels (6to4-PMT) provide a framework that can help manage 6to4 tunnels operating in an anycast configuration. The 6to4-PMT framework is intended to serve as an option for operators to help improve the experience of 6to4 operation when conditions of the network may provide sub-optimal performance or break normal 6to4 operation. 6to4-PMT supplies a stable provider prefix and forwarding environment by utilizing existing 6to4 relays with an added function of IPv6 Prefix Translation. This operation may be particularly important in NAT444 infrastructures where a customer endpoint may be assigned a non-RFC1918 address, thus breaking the return path for anycast-based 6to4 operation. 6to4-PMT has been successfully used in a production network, implemented as open source code, and implemented by a major routing vendor.

This document depicts many common Voice over IP (VoIP) use cases for Session Initiation Protocol (SIP) peering. These use cases are categorized into static and on-demand, and then further subcategorized into direct and indirect. These use cases are not an exhaustive set, but rather the most common use cases deployed today. Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6405.