A three-dimensional structure consisting of poly(ε-caprolactone) (PCL) nanofibers covered by periodically spaced PCL crystal lamellae, a self-induced nanohybrid shish-kebab (SINSK) structure, was created using electrospinning followed by a self-induced crystallization. The resulting structure that resembles the nanotopography of natural collagen nanofibrils in the extracellular matrix (ECM) of human tissues could serve as a tissue engineering scaffold. The formation mechanism of the self-induced shish-kebab structure was investigated with real-time observation of the crystallization process. Electrospun polylactic acid (PLA)/PCL nanofibers were also employed as shish elements to study the effects of different shish materials. The results show that the geometric dimensions of the shish-kebabs are highly related to the initial concentration of PCL solution. The shish material played an important role in the creation of shish-kebab structure. Cell assays with NIH 3T3 ECACC fibroblasts suggest that the nanotopography of the nanofiber surface with kebab crystals that mimic collagen fibrils facilitated the cell attachment and spreading of 3T3 fibroblasts cells.

The apparent deformation due to an electric field does not rigorously describe the electrostriction phenomenon. This is in part due to uncertainties in the mechanical constraints at the specimen boundaries. Such constraints are very critical in thin films. Determining the electric-field-induced stress seems to be a more adequate approach to electrostriction. General thermodynamic considerations identify the electrostriction stress through strain derivatives of the dielectric displacement. Consequently, the derivatives of the dielectric coefficients are termed the electrostriction parameters. The strain-dielectric response of a material, which is called dielectrostriction, provides an avenue to study electrostriction. However, controlling the mechanical boundary conditions of a thin-film specimen can be challenging. This problem can be overcome by using a proposed planar capacitor sensor which does not require any mechanical contact with the specimen. The theoretical background and experimental results for the dielectrostriction study of a uniaxially loaded specimen are presented and discussed.

The effects of nanoclay on the crystallization behavior, microcellular structure, and mechanical properties of thermoplastic polyurethane (TPU)/clay nanocomposite (TPUCN) foams were investigated using differential scanning calorimetry, rheometry, scanning electron microscope, transmission electron microscopy, and X‐ray diffraction. It was found that the nanoclay acted as an effective nucleating agent for both crystal nucleation and cell nucleation. As a result, it significantly enhanced the crystallization behavior of the hard segment (HS) domains in TPU while refining the foamed structure of the microcellular injection molded parts. In particular, the average cell diameter of TPUCN foams decreased from 45 µm for neat TPU to 27 µm for TPUCN5 (5 wt% clay) and 18 µm for TPUCN10 (10 wt% clay). Furthermore, the cell density increased from 0.7 × 107 cell/cm3 for neat TPU to 1.4 × 107 cell/cm3 and 3.1 × 107 cell/cm3 for TPUCN5 and TPUCN10, respectively. In addition, the tensile strength also increased by 56.3% and 89.2% with 5 and 10 wt% clay content, respectively. By controlling the cell nucleation behavior through uniformly dispersed nanoclay, this study demonstrates that it is feasible to produce TPUCN foams via microcellular injection molding with desirable microcellular structures and improved mechanical properties. POLYM. ENG. SCI., 56:319–327, 2016. © 2015 Society of Plastics Engineers