No abstract

No abstract

The responses of flat reinforced concrete (RC) floor slabs with openings subjected to horizontal in-plane cyclic loads in addition to vertical service loads were investigated using nonlinear finite element analysis (FEA). A finite element model (FEM) was designed to perform a parametric analysis. The effects of opening sizes (7%, 14%, 25%, and 30% of the total area of the slab), opening shapes (elliptical, circular, L-shaped, T-shaped, cross, and rectangular), and location on the hysteretic behavior of the floor slab were considered. The research indicated that openings in RC floor slabs reduce the energy absorption capacity and stiffness of the floor slab. The inclusion of 30% opening on the floor slab causes a 68.5%, 47.3%, and 45.6% drop in lateral load capacity, stiffness, and lateral displacement, respectively, compared to the floor slab with no openings. The flat RC floor slab with a circular opening shape has increased efficiency. The placement of the openings is more desirable by positioning the openings at the intersection of two-column strips.

Steel fiber reinforced concrete exhibits ductility. This ductility behavior enables redistribution of moment between the negative and positive moment zones in continuous SFRC beams. The sectional capacity of an SFRC continuous beam was determined using the moment-curvature response, the ductility of the member using the moment-rotation response, and the moment redistribution behavior using the moment-rotation response. The theoretical moment-curvature response was calculated from the stress-strain response for 0 % (control), 0.5 %, 0.75 %, and 1.5 % SFRC member which served the basis for the defined moment-rotation behavior and FEA. A five-point bending test was conducted on a two-span beam using a constitutive material model in the FEA software package, Abaqus/CAE. The concrete damage plasticity (CDP) model was used to conduct a displacement-controlled analysis on the fully integrated 3D hexahedral element (C3D8). The numerical study revealed that the flexural behavior, bending capacity, rotation capacity, and ductility of the 0.5 %, 0.75 %, and 1.5 % SFRC beams were significantly enhanced than the 0 % SFRC beam. However, as steel fiber volume increased, the quantity of moment redistribution in the SFRC beam decreased. The amount of moment redistribution obtained was 21.8 % for 0 %, 19 % for 0.5 %, 18.1 % for 0.75 %, and 13.9 % for 1.5 % SFRC.