A photonic crystal fiber-based chirped pulse amplification delivering 272 fs pulses of 66.4 µJ energy at a repetition rate of 500 kHz is presented, resulting in an average/peak power of 33.2 W/244 MW. A single grating is adopted for the pulse width stretching and compression, which leads to high-compactness and low cost of the system. The output beam is near-diffraction-limited (M2 = 1.1 ± 0.05) with a power stability better than 0.5%. The cutting of alumina ceramic substrate and flexible printed circuit are demonstrated by using the laser system. The results indicate that the laser is competent for industrial applications.

Super-resolution structured illumination microscopy (SR-SIM) has become a widely used nanoscopy technique for rapid, long-term, and multi-color imaging of live cells. Precise but troublesome determination of the illumination pattern parameters is a prerequisite for Wiener-deconvolution-based SR-SIM image reconstruction. Here, we present a direct reconstruction SIM algorithm (direct-SIM) with an initial spatial-domain reconstruction followed by frequency-domain spectrum optimization. Without any prior knowledge of illumination patterns and bypassing the artifact-sensitive Wiener deconvolution procedures, resolution-doubled SR images could be reconstructed by direct-SIM free of common artifacts, even for the raw images with large pattern variance in the field of view (FOV). Direct-SIM can be applied to previously difficult scenarios such as very sparse samples, periodic samples, very small FOV imaging, and stitched large FOV imaging.

Design interface were divided into three levels according to the characteristics of design process. The paper analyzes and give the main reasons which result in design interface. By comprehensive analysis, countermeasures are put forward to solve the design interface from the perspective of the total design institute.

No abstract