No abstract

A compact frequency reconfigurable antenna for mobile handset application is proposed in this paper. The antenna consists of an inverted L-shaped feeding strip, a shorter grounded strip, and a longer grounded strip which is connected with four inductors by using a single-pole four-throw RF switch. When we change the working states of the RF switch, the corresponding inductor is connected with the long grounded strip and different resonant modes of the antenna can be realized. The measured −6 dB impedance bandwidth of the presented antenna is 683–960 MHz and 1460–2820 MHz, which is able to cover the LTE700/GSM850/900 and GPS/DCS1800/PCS1900/UMTS2100/LTE2300/2500 bands. The antenna gain, radiation efficiency, and radiation patterns are also described in the paper.

Abstract-In this paper, a CPW-fed reconfigurable clover-shaped antenna with switchable circular polarization is proposed. This antenna consists of a clover-shaped patch, four p-i-n diodes, and two pairs of quarter-circular-rings. By electrically controlling the four p-i-n diodes to form two orthogonal bow-tie shaped current paths, the proposed antenna can be operated in two modes: the left-hand circular polarization (LHCP) and right-hand circular polarization (RHCP) modes. Two pairs of quarter rings are used to improve the bandwidth and AR performance of the antenna. The measured 10-dB reflection coefficient and 3-dB axial-ratio (AR) bandwidth of the prototype antenna is approximately 12.3% and 19%, respectively, which is enough for some wireless applications such as WLAN IEEE 802.11 b/g (4%). Gain and radiation pattern are also presented.