Micro-supercapacitors are promising miniaturized energy storage devices that have attracted considerable research interest. However, their widespread use is limited by inefficient microfabrication technologies and their low energy density. Here, a flexible, designable micro-supercapacitor can be fabricated by a single pulse laser photonic-reduction stamping. A thousand spatially shaped laser pulses can be generated in one second, and over 30,000 micro-supercapacitors are produced within 10 minutes. The micro-supercapacitor and narrow gaps were dozens of microns and 500 nm, respectively. With the unique three-dimensional structure of laser-induced graphene based electrode, a single micro-supercapacitor exhibits an ultra-high energy density (0.23 Wh cm−3), an ultra-small time constant (0.01 ms), outstanding specific capacitance (128 mF cm−2 and 426.7 F cm−3) and a long-term cyclability. The unique technique is desirable for a broad range of applications, which surmounts current limitations of high-throughput fabrication and low energy density of micro-supercapacitors.

Ultratransparent electrodes have attracted considerable attention in optoelectronics and energy technology. However, balancing energy storage capability and transparency remains challenging. Herein, an in situ strategy employing a temporally and spatially shaped femtosecond laser is reported for photochemically synthesizing of MXene quantum dots (MQDs) uniformly attached to laser reduced graphene oxide (LRGO) with exceptional electrochemical capacitance and ultrahigh transparency. The mechanism and plasma dynamics of the synthesis process are analyzed and observed at the same time. The unique MQDs loaded on LRGO greatly improve the specific surface area of the electrode due to the nanoscale size and additional edge states. The MQD/LRGO supercapacitor has high flexibility and durability, ultrahigh energy density (2.04 × 10−3 mWh cm−2), long cycle life (97.6% after 12 000 cycles), and excellent capacitance (10.42 mF cm−2) with both high transparency (transmittance over 90%) and high performance. Furthermore, this method provides a means of preparing nanostructured composite electrode materials and exploiting quantum capacitance effects for energy storage.

Molybdenum disulfide (MoS 2 ) micro/nanostructures are desirable for tuning electronic properties, developing required functionality, and improving the existing performance of multilayer MoS 2 devices. This work presents a useful method to flexibly microprocess multilayer MoS 2 flakes through femtosecond laser pulse direct writing, which can directly fabricate regular MoS 2 nanoribbon arrays with ribbon widths of 179, 152, 116, 98, and 77 nm, and arbitrarily pattern MoS 2 flakes to form micro/nanostructures such as single nanoribbon, labyrinth array, and cross structure. This method is mask-free and simple and has high flexibility, strong controllability, and high precision. Moreover, numerous oxygen molecules are chemically and physically adsorbed on laser-processed MoS 2 , attributed to roughness defect sites and edges of micro/nanostructures that contain numerous unsaturated edge sites and highly active centers. In addition, electrical tests of the field-effect transistor fabricated from the prepared MoS 2 nanoribbon arrays reveal new interesting features: output and transfer characteristics exhibit a strong rectification (not going through zero and bipolar conduction) of drain−source current, which is supposedly attributed to the parallel structures with many edge defects and p-type chemical doping of oxygen molecules on MoS 2 nanoribbon arrays. This work demonstrates the ability of femtosecond laser pulses to directly induce micro/nanostructures, property changes, and new device properties of two-dimensional materials, which may enable new applications in electronic devices based on MoS 2 such as logic circuits, complementary circuits, chemical sensors, and p−n diodes.