We demonstrate the utility of cavity-enhanced Raman spectroscopy (CERS) as a unique multigas analysis tool for power transformer diagnosis. For this purpose, improvements have been added to our recently introduced CERS apparatus. Based on optical feedback frequency-locking, laser radiation is coupled into a high-finesse optical cavity, thus resulting in huge intracavity laser power. With 20 s exposure time, ppm-level gas sensing at 1 bar total pressure is achieved, including carbon dioxide (CO 2 ), carbon monoxide (CO), hydrogen (H 2 ), methane (CH 4 ), ethane (C 2 H 6 ), ethylene (C 2 H 4 ), acetylene (C 2 H 2 ), nitrogen (N 2 ), and oxygen (O 2 ). By using the internal standard gas (sulfur hexafluoride, SF 6 ), the quantification of multigas with high accuracy is also realized, which is confirmed by the measurement of calibration gases. For fault diagnosis, transformer oil is sampled from a 110 kV power transformer in service. Dissolved gases are extracted and analyzed by the CERS apparatus. Then the transformer is diagnosed according to the measurement results. CERS has the ability to analyze multigas with high selectivity, sensitivity, and accuracy, it has great potential in gas sensing fields.

Emamectin benzoate, a macrocyclic lactone, can be used in low quantities to control arthropod pests, effectively. However, its poor photostability prevents its further use. To delay its photodegradation, novel acrylate‐type polymeric nanoparticles were synthesized and tested as materials for improving pesticide photostability. N‐acylated emamectin benzoate was synthesized via bonding emamectin benzoate to acrylamide. The resulting pesticide, containing the double bond linkage –C=C–N–, was copolymerized with butyl acrylate and methyl methacrylate by the emulsion polymerization method. The refined polymers were characterized by Fourier transform infrared spectroscopy spectroscopy, and result illustrated the pesticide was conjugated to the polymers. Atomic force microscope and dynamic light scattering analyses were also used for determining the average particle diameters of pesticide–polymer conjugates. Photostability tests showed that the nanoparticles obtained exhibited greatly improved photostability. Additionally, the laboratory toxicity tests demonstrated that the insecticidal effects of the novel emamectin benzoate formulation were better than those of the control pesticide formulation (emamectin benzoate EC). Copyright © 2012 John Wiley & Sons, Ltd.

The main aim of the present study was to electrospin ibuprofen (IBU)-loaded composite nanofibers to improve the performances of transdermal patches. Cellulose acetate/poly(vinyl pyrrolidone) (CA/PVP) blends were used to fabricate uniform nanofibers. Investigations on the physicochemical properties of CA/PVP solutions indicated that the addition of appropriate PVP improved the electrospinnability of original CA solutions. Detections on the physical states of IBU in medicated CA/PVP nanofibers suggested that IBU was uniformly distributed in nanofibers in an amorphous state. Comparing to IBU-loaded casting membrane, the medicated CA/PVP nanofibers provided a faster IBU diffusion manner and a better ex vitro skin permeation profile due to their high superficial areas and the amorphous IBU. Furthermore, CA/PVP nanofibers exhibited a high water vapor permeability, which could render an improved breathability to transdermal patches. In sum, the electrospun drug-loaded CA/PVP nanofibers exhibited great potentials to improve the thermodynamic stability and breathability of transdermal patches, which could be used to develop new types of transdermal drug delivery system (TDDS).

A facile ligand exchange approach for surface‐functionalized ZnS nanoparticles (NPs) with 5‐(2‐methacryloylethyloxymethyl)‐8‐quinolinol (MQ) is described. The MQ–ZnS NPs, with a cubic crystal structure, have the same diameter as ZnS NPs without MQ about 3.0 nm. The MQ–ZnS NPs exhibit strong fluorescence emission at about 500 nm and a high photoluminescence (PL) quantum yield (QY), up to 40%, with a decreasing ratio of MQ to ZnS NPs. The PL decay study reveals that the lifetimes of the different MQ–ZnS NPs with a single exponential decay are in the nanosecond time domain for emission at about 500 nm, which is obviously different from that of ZnS NPs with a biexponential decay for defect‐state emission at 420 nm. The functionalized MQ–ZnS NPs are successfully incorporated into the polymer matrix by in situ bulk polymerization to fabricate transparent bulk nanocomposites with good thermal stability and processability. Transmission electron microscopy results show that the NPs are uniformly dispersed in the polymer matrix without aggregation. The good PL properties of MQ–ZnS NPs are preserved in the bulk nanocomposites. It is observed that the nanocomposites have red‐shifted excitation and emission wavelengths compared with those of both the polymer matrix and MQ–ZnS NPs, possibly because of the cooperative interaction between MQ–ZnS NPs and the polymer matrix with blue emission.