Inverted perovskite solar cells (PSCs) with low‐temperature processed hole transporting materials (HTMs) suffer from poor performance due to the inferior hole‐extraction capability at the HTM/perovskite interfaces. Here, molecules with controlled electron affinity enable a HTM with conductivity improved by more than ten times and a decreased energy gap between the Fermi level and the valence band from 0.60 to 0.24 eV, leading to the enhancement of hole‐extraction capacity by five times. As a result, the 3,6‐difluoro‐2,5,7,7,8,8‐hexacyanoquinodimethane molecules are used for the first time enhancing open‐circuit voltage (Voc) and fill factor (FF) of the PSCs, which enable rigid‐and flexible‐based inverted perovskite devices achieving highest power conversion efficiencies of 22.13% and 20.01%, respectively. This new method significantly enhances the Voc and FF of the PSCs, which can be widely combined with HTMs based on not only NiOx but also PTAA, PEDOTT:PSS, and CuSCN, providing a new way of realizing efficient inverted PSCs.

Perovskite solar cell (PSC) modules employing a hole transport layer (HTL) without unstable dopants possess high potential for improving operational stability. However, the low efficiencies of the devices greatly limit their commercial applications owing to the lower efficacy of the dopant‐free HTL, introduced by the unintentional n‐doping effect of volatile ions from the halide‐rich perovskite surface. Here, a scalable heterostructure integrated by a methylammonium‐free perovskite film with an iodide‐rich surface, an ultrathin interlayer of bridge‐jointed graphene oxide nanosheets (BJ‐GO), and an HTL without additional ionic dopants is developed. In this heterostructure, the iodide ions are physically immobilized by the compact 2D network, and lead defects are chemically passivated by multiple coordination bonds. Moreover, the BJ‐GO with tunable surface energy enables a highly ordered HTL a considerably improved carrier mobility by an order of magnitude. Finally, the PSC module with an area of 35.80 cm2 employing this heterostructure shows a certified efficiency of 15.3%. The encapsulated PSC modules retain over 91% of initial efficiency after the damp heat test at 85 °C and ≈85% relative humidity for 1000 h, while maintaining 90% of the initial value for 1000 h at the maximum power point under continuous 1‐Sun illumination at 60 °C.