This paper presents an elastic-plastic asperity microcontact model for contact between two nominally flat surfaces. The transition from elastic deformation to fully plastic flow of the contacting asperity is modeled based on contact-mechanics theories in conjunction with the continuity and smoothness of variables across different modes of deformation. The relations of the mean contact pressure and contact area of the asperity to its contact interference in the elastoplastic regime of deformation are respectively modeled by logarithmic and fourth-order polynomial functions. These asperity-scale equations are then used to develop the elastic-plastic contact model between two rough surfaces, allowing the mean surface separation and the real area of contact to be calculated as functions of the contact load and surface plasticity index. Results are presented for a wide range of contact load and plasticity index, showing the importance of accurately modeling the deformation in the elastoplastic transitional regime of the asperity contacts. The results are also compared with those calculated by the GW and CEB models, showing that the present model is more complete in describing the contact of rough surfaces. [S0742-4787(00)01201-7]

No abstract

This paper presents a micro-contact model incorporating asperity interactions in elastic-plastic contact of rough surfaces. The effect of the asperity interactions on the local deformation behavior of a given micro-contact is first modeled based on the Saint-Venant’s Principle and Love’s Formula. The local contact interference is related in closed form to the local contact load, the global mean pressure and material parameters. This micro-contact model equation is then integrated into the elastic-plastic contact model developed in Zhao et al. (2000) to allow the asperity interactions and plastic deformation to be considered simultaneously. The effects of the asperity interactions on the mean surface separation, the real area of contact and the redistribution of the contact load among contacting asperities of different heights are studied. The results show that the asperity interactions can significantly affect the mean surface separation and micro-contact load redistribution. The results also reveal that the effect of asperity interactions can be largely cancelled out by the effect of asperity plastic deformation.

Graphene oxide (GO) was prepared according to a modified Hummers method, and a range of GO/ultrahigh molecular weight polyethylene (UHMWPE) composites were fabricated then their mechanical and thermal properties were investigated.

No abstract