Abstract:In recent years, the research on nanocellulose composites with polymers has made significant contributions to the development of functional and sustainable materials. This review outlines the chemistry of the interaction between the nanocellulose and the polymer matrix, along with the extent of the reinforcement in their nanocomposites. In order to fabricate well-defined nanocomposites, the type of nanomaterial and the selection of the polymer matrix are always crucial from the viewpoint of polymer-filler compatibility for the desired reinforcement and specific application. In this review, recent articles on polymer/nanocellulose composites were taken into account to provide a clear understanding on how to use the surface functionalities of nanocellulose and to choose the polymer matrix in order to produce the nanocomposite. Here, we considered cellulose nanocrystal (CNC) and cellulose nanofiber (CNF) as the nanocellulosic materials. A brief discussion on their synthesis and properties was also incorporated. This review, overall, is a guide to help in designing polymer/nanocellulose composites through the utilization of nanocellulose properties and the selection of functional polymers, paving the way to specific polymer-filler interaction.

No abstract

Liquefaction of waste paper (WP) was conducted in the presence of polyhydric alcohols to prepare biodegradable polyurethane foam. The liquefied-WP-based polyol had suitable characteristics such as apparent molecular weight, hydroxyl value, and viscosity for the preparation of rigid polyurethane foam and was successfully applied to produce polyurethane foam with the appropriate combinations of foaming agents. The obtained foams showed satisfactory densities and mechanical properties as good as those of foams obtained from liquefied wood-and starch-based polyols. The foams had almost the same thermal stability at initial weight loss and seemed to be potentially biodegradable because they were degraded to some extent in leaf mold. There were no mutagens or carcinogens in the water extracts of the foams.

An attempt was made to synthesize novel composites comprising poly(2-hydroxyethyl methacrylate) (PHEMA) and cellulose nanocrystallites (CNC) (acid-treated cotton microfibrils) from suspensions of CNC in an aqueous 2-hydroxyethyl methacrylate (HEMA) monomer solution. The starting suspensions (∼5 wt % CNC) separated into an isotropic upper phase and an anisotropic bottom one in the course of quiescent standing. By way of polymerization of HEMA in different phase situations of the suspensions, we obtained films of three polymer composites, PHEMA-CNC(iso), PHEMA-CNC(aniso), and PHEMA-CNC(mix), coming from the isotropic phase, anisotropic phase, and embryonic nonseparating mixture, respectively. All the composites were transparent and, more or less, birefringent under a polarized optical microscope. A fingerprint texture typical of cholesteric liquid crystals of longer pitch spread widely in PHEMA-CNC(aniso) but rather locally appeared in PHEMA-CNC(iso). Any of the CNC incorporations into the PHEMA matrix improved the original thermal and mechanical properties of this amorphous polymer material. In dynamic mechanical measurements, the locking-in of the respective CNC assemblies gave rise to an increase in the glass-state modulus E' of PHEMA as well as a marked suppression of the E'-falling at temperatures higher than T(g) (≈ 110 °C) of the vinyl polymer. It was also observed for the composites that their modulus E' rerose in a range of about 150-190 °C, which was attributable to a secondary cross-linking formation between PHEMA chains mediated by the acidic CNC filler. The mechanical reinforcement effect of the CNC dispersions was ensured in a tensile test, whereby PHEMA-CNC(aniso) was found to surpass the other two composites in stiffness and strength.

Cellulose derivatives having a cross-linkable mercapto group were prepared by esterification of cellulose acetate (CA) with mercaptoacetic acid. The molecular structure of a series of products (CA-MA) was characterized by (1)H and (1)H- (13)C HMQC NMR spectroscopy and gel permeation chromatography. The solubility of CA-MA in water and organic solvents could be controlled by changing the preparation conditions including the degree of acetyl substitution of the starting CA. The CA-MA samples thus synthesized showed a sol-gel transition in solution and a shape memory-recovery behavior in film form through adequate redox treatments due to the reversible, cross-linking association and dissociation between mercapto groups. Dimethyl sulfoxide was usable as the organic solvent and oxidant, while the major reducing reagent was 2-mercaptoethanol or ammonium mercaptoacetic acid. The progress of the redox reactions was followed by using a confocal depth scanning technique in Raman spectroscopy. It was found that the compatibility between the cellulose derivatives and the redox reagents used was an important factor for the successful reactions, especially in the samples of film form. The cross-linking effect on the thermal and viscoelastic properties of the CA-MA films was also estimated by differential scanning calorimetry and dynamic mechanical analysis. Discussion focused on the alternately declining and recovering behavior of a principal loss tan delta peak, observed following the redox treatments repeated for the CA-MA film specimens.