In OFDM systems, peak-to-average power ratio (PAPR) reduction of the signal is one of the main challenges that need to be overcome in order to use the transmitter in an efficient manner. As one of attractive techniques, interleaving can be used in PAPR reduction for multicarrier signals without spectrum distortion. In this paper, the authors propose to extend the possibilities of interleaving to improve PAPR reduction, to use a new coding of interleaver keys at the transmitter and a robust decoding procedure at the receiver. In order not to degrade the data rate, the use of null subcarriers to transmit side information to the receiver is proposed and evaluated. Simulation results in the context of the WLAN 802.11a standard in the presence of a nonlinear power amplifier model with memory, show a reduction of PAPR of approximately 5.2 dB, and an improvement of bit error rate and error vector magnitude of about 2 decades and 4% respectively, while respecting the spectral mask specification.

No abstract

No abstract

Nonlinear behavior and power efficiency of the Power Amplifier (PA) contradictorily depend on the input signal amplitude distribution. The transmitted signal in multi-carrier modulation exhibits high Peak-to-Average Power Ratio (PAPR) and large bandwidths, leading to the degradation of the radio link and additional generation out-of-band interferences, which degrade the quality of the transmission. Practical solutions exist, like a power back-off, but with unacceptable efficiency performances of the transmitter. This paper deals with efficiency and linearity improvement using a new PAPR reduction method based on the combination of Discrete Cosine Transform and shaping technique. The main principle is to determine an optimal coding scheme according to a trade-off between coding complexity and performance benefits in the presence of PA nonlinearities. Simulation and experimental results in the context of OFDM signal and using a 20 W–3.7 GHz Radio-Frequency Power Amplifier show an improvement on PAPR reduction of about 3.25 dB. Also, the communication criteria like Bit Error Rate and Error Vector Magnitude are improved by about one decade and a half and $$8\%$$ 8 % , respectively.