No abstract

No abstract

No abstract

No abstract

In this study, the relative density and hardness of Y2O3 dispersed tungsten alloy were investigated as functions of the Y2O3 content and sintering temperature. The sintering temperature and the amount of the second phase were varied from 1800 to 2500 o C and 0 to 2.0 weight pct, respectively. The relative density of the alloys is higher than that of pure tungsten in the range from 2000 to 2500 o C, whereas the density is lower at 1800 o C. As the Y2O3 content increases, the sintered density increases at a given temperature. The transition temperature (Ttr), where the relative density of the alloys exceeds that of pure tungsten, is reduced with increased Y2O3 particle content. In order to examine the effect of the second phase on the mechanical property, the hardness of pure tungsten and the alloys are measured. The hardness is mainly dependent upon the relative density of the alloys, rather than the amount of the second phase and tungsten grain size. The relationship between hardness and density is discussed according to the plasticity theory of porous materials.