This paper presents a finite element model for analysing the behaviour of granular material wrapped with polyethylene bags under vertical compression and cyclic shearing. The simple Mohr-Coulomb model is used to represent the soil behaviour. The polyethylene bag is represented by a linear-elastic-perfect-plastic model. The soil-bag interface is modelled with contact constraints. The main purpose of the numerical analysis is to validate the anticipated performance of soilbags under various loading conditions and hence the effectiveness of soilbags as a method of ground improvement.

This paper presents a testing rig for measuring the reactions on rigid pipes buried in sand during episodes of relative displacement. Following a detailed presentation of the 1g prototype, the test preparation procedure, and the characterization of the test sand’s shear strength and dilation potential under the low confining stresses pertinent to the problem, the paper focuses on the workflow devised to obtain accurate measurements of friction and arching effects, and accordingly normalize them to account for scale (stress level) effects. Emphasis is put on demonstrating the effectiveness of the sand deposition method for accurately controlling the density of the sample, and on quantitatively assessing its uniformity. Measurements obtained during a series of uplift tests, including reaction force – pipe displacement curves and images of the developing failure surface, facilitated by particle image velocimetry and close-range photogrammetry techniques, are compared against published data and analytical methods. The results lead to the development of a new simplified formula for calculating the uplift resistance to buried pipe movements in sand: capable of accounting for scale effects, yet simple enough to be used for the analysis of pipes in practice.

This paper presents results of a series of experiments modelling uplift and lateral drag of a rigid pipe buried in dry sand. The main aim of these tests is to document the gradual transition from shallow to a deep sand failure mechanism as the pipe embedment depth increases, identify which parameters affect this transition, and determine experimentally the critical embedment depth, beyond which the normalized reaction acting on the pipe remains constant with increasing pipe embedment. Measurements of the reaction as a function of the relative sand–pipe movement and analysis of images captured during the tests with the particle image velocimetry method suggest that the critical embedment depth depends on sand density, but not on the direction of pipe movement. Outcomes of this study contribute to identifying the limits of applicability of simplified methods used to determine the peak reaction on pipes subjected to ground movements and the estimation of rational parameters for the analysis of deeply buried pipes with beam-on-nonlinear Winkler foundation models.

This paper presents a study on the amplification of horizontal soil stresses during flat dilatometer test (DMT) blade penetration based on three-dimensional total and effective stress numerical analyses, while considering stress-flow coupling and large deformations. The focus here is on saturated clays, and the effect of soil stress history on the horizontal stress index is discussed in detail. The obtained results appear to be in good agreement with published and new field data, leading to the proposal of two new expressions for estimating the overconsolidation ratio and the earth pressure coefficient at rest directly from flat dilatometer tests in estuarine clays.

This paper presents a series of physical modelling tests performed to measure the resistance developing during lateral dragging of a rigid pipe buried in loose to very dense dry sand. The experiments were performed in a small-scale prototype developed to model sand–pipe interaction during relative ground movement episodes while accurately controlling the density and uniformity of sand around the pipe. Digital imaging and particle image velocimetry equipment are integrated with the rig, so as to track the evolution of the failure surface developing in sand with increasing pipe displacements. Auxiliary components of the rig allow investigation of the effects of pipe kinematic constraints and embedment method on the results obtained. Accordingly, the measurements obtained with the developed prototype are compared against results from similar studies, with the intention of shedding some light on the scatter observed in published data, and on the provisions from different pipe stress analysis guidelines. It is shown that current simplified methods may underestimate the lateral reaction developing on pipes in very dense sand beds, and analysis models built around these methods may under-predict pipe strains. To alleviate this, a modified expression is proposed for estimating the peak reaction of lateral elastoplastic soil springs, and an upper bound of this reaction is provided for design purposes.