No abstract

Interconnected macroporous foams were synthesized by templating oil-in-water Pickering high internal phase emulsions solely stabilized by lignin particles. They exhibited excellent adsorption capacity for copper(II) ions in aqueous solutions.

Effective removal of crude oils, petroleum products, organic solvents, and dyes from water is of significance in oceanography, environmental protection, and industrial production. Various techniques including physical and chemical absorption have been developed, but they suffer from problems such as low separation selectivity, a complicated and lengthy process, as well as high costs for reagents and devices. We present here a new material, termed nitrogen-rich carbon aerogels (NRC aerogels,) with highly porous structure and nitrogen-rich surfaces, exhibiting highly efficient separation of specific substances such as oils and organic pollutants. More importantly, we demonstrate that the fabricated NRC aerogels can also collect micrometer-sized oil droplets from an oil-water mixture with high efficiency that is well beyond what can be achieved by most existing separation methods, but is extremely important in practical marine oil-spill recovery because a certain amount of oils often shears into many micrometer-sized oil droplets by the sea wave, resulting in enormous potential destruction to marine ecosystem if not properly collected. Furthermore, our fabricated material can be used like a recyclable container for oils and chemicals cleanup because the oil/chemical-absorbed NRC aerogels can be readily cleaned for reuse by direct combustion in air because of their excellent hydrophobicity and fire-resistant property. We demonstrate that they keep 61.2% absorption capacity even after 100 absorption/combustion cycles, which thus has the highest recyclability of the reported carbon aerogels. All these features make these fabricated NRC aerogels suitable for a wide range of applications in water purification and treatment.

Ultralight, fire-resistant, and compressible foams as recyclable oil absorbents are facilely prepared from cheap melamine resins.

Porous scaffolds consisting of bioactive inorganic nanoparticles and biodegradable polymers have gained much interest in bone tissue engineering. We report here a facile approach to fabricating poly(l-lactic acid)-grafted hydroxyapatite (g-HAp)/poly(lactide-co-glycolide) (PLGA) nanocomposite (NC) porous scaffolds by solvent evaporation of Pickering high internal phase emulsion (HIPE) templates, where g-HAp nanoparticles act as particulate stabilizers. The resultant porous scaffolds exhibit an open and rough pore structure. The pore structure and mechanical properties of the scaffolds can be tuned readily by varying the g-HAp nanoparticle concentration and internal phase volume fraction of the emulsion templates. With increasing the g-HAp concentration or decreasing the internal phase volume fraction, the pore size and the porosity decrease, while the Young's modulus and the compressive stress enhance. Moreover, the in vitro mineralization tests show that the bioactivity of the scaffolds increases with increasing the g-HAp concentration. Furthermore, the anti-inflammatory drug ibuprofen (IBU) is loaded into the scaffolds, and the drug release studies indicate that the loaded-IBU exhibits a sustained release profile. Finally, in vitro cell culture assays prove that the scaffolds are biocompatible because of supporting adhesion, spreading, and proliferation of mouse bone mesenchymal stem cells. All the results indicate that the solvent evaporation based on Pickering HIPE templates is a promising alternative method to fabricate NC porous scaffolds for potential bone tissue engineering applications.