Time-varying magnetic flux can be induced from the dynamic mechanical strain of acoustic waves in multiferroic devices that are comprised of piezoelectric and magnetostrictive material. Such devices can be used to create electromagnetic radiation and to alleviate the platform effect associated with low-profile conformal antennas. In this paper, a bulk acoustic wave (BAW)mediated multiferroic antenna structure is proposed. Its potential for efficient radiation of electromagnetic waves is evaluated by analytically deriving the lower bound of its radiation quality factor (Q factor). A one-dimensional (1-D) multiscale finite-difference time-domain (FDTD) technique is developed to predict the bilateral, dynamic coupling between the acoustic waves and electromagnetic waves. The simulation shows a decaying stress profile in the BAW resonator structure, which implies that the radiation of the electromagnetic waves acts as a damping load to the acoustic resonance. The simulated radiation Q factor matches well with the analytical derivations and the agreement validates both the operating principle of the proposed antenna and the FDTD algorithm developed. The study concludes that efficient antennas may be realized at GHz frequencies with thin film multiferroic material that has thicknesses of the order of 10 −5 wavelength.Index Terms-Bulk acoustic waves (BAW), conformal antennas, film bulk acoustic resonators (FBARs), finite-difference time-domain (FDTD) method, multiferroic antennas, multiferroic material, platform effect.

No abstract

No abstract

Achieving non-reciprocity through unconventional methods without the use of magnetic material has recently become a subject of great interest. Towards this goal a time switching strategy known as the Sequentially-Switched Delay Line (SSDL) is proposed. The essential SSDL configuration consists of six transmission lines of equal length, along with five switches. Each switch is turned on and off sequentially to distribute and route the propagating electromagnetic wave, allowing for simultaneous transmission and receiving of signals through the device. Preliminary experimental results with commercial off the shelf parts are presented which demonstrated non-reciprocal behavior with greater than 40 dB isolation from 200 KHz to 200 MHz. The theory and experimental results demonstrated that the SSDL concept may lead to future on-chip circulators over multi-octaves of frequency.

No abstract