Thin carbonized polydopamine (C-PDA) coatings are found to have similar structures and electrical conductivities to those of multilayered graphene doped with heteroatoms. Greatly enhanced electrochemical properties are achieved with C-PDA-coated SnO(2) nanoparticles where the coating functions as a mechanical buffer layer and conducting bridge.

A wearable and flexible pressure sensor is essential to the realization of personalized medicine through continuously monitoring an individual's state of health and also the development of a highly intelligent robot. A flexible, wearable pressure sensor is fabricated based on novel single-wall carbon nanotube /tissue paper through a low-cost and scalable approach. The flexible, wearable sensor showed superior performance with concurrence of several merits, including high sensitivity for a broad pressure range and an ultralow energy consumption level of 10 W. Benefited from the excellent performance and the ultraconformal contact of the sensor with an uneven surface, vital human physiological signals (such as radial arterial pulse and muscle activity at various positions) can be monitored in real time and in situ. In addition, the pressure sensors could also be integrated onto robots as the artificial skin that could sense the force/pressure and also the distribution of force/pressure on the artificial skin.

Silicon (Si) is a promising material for lithium ion battery (LIB) anodes due to its high specific capacity. To overcome its shortcomings such as insulation property and large volume change during the charge-discharge process, a novel hybrid system, Si nanoparticles encapsulated in hollow graphitized carbon nanofibers, is studied. First, electrospun polyacrylonitrile (PAN)-Si hybrid nanofibers were obtained using water as the collector. The loose nanofiber lumps suspended in water have large inter-fiber distance, allowing in situ coating of a thin layer of polydopamine (PDA), the source for graphitized carbon, uniformly throughout the system. The designed morphology and structure were then realized by etching and calcination, and the morphology and structure were subsequently verified by various analytical techniques. Electrochemical measurements show that the resulting hollow hybrid nanofibers (C-PDA-Si NFs) exhibit much better cycling stability and rate capacity than conventional C/Si nanofibers derived by electrospinning of PAN-Si followed by calcination. For instance, the capacity of C-PDA-Si NFs is as high as 72.6% of the theoretical capacity after 50 cycles, and a high capacity of 500 mA h g(-1) can be delivered at a current density of 5 A g(-1). The significantly improved electrochemical properties of C-PDA-Si NFs are due to the excellent electrical conductivity of the carbonized PDA (C-PDA) shell that compensates for the insulation property of Si, the high electrochemical activity of C-PDA, which has a layered structure and is N-doped, the hollow nature of the nanofibers and small size of Si nanoparticles that ensure smooth insertion-extraction of lithium ions and more complete alloying with them, as well as the buffering effect of the remaining PAN-derived carbon around the Si nanoparticles, which stabilizes the structure.

Inkjet printing is a powerful and cost-effective technique for deposition of liquid inks with high accuracy, which is not only of great significance for graphic applications but also has enormous potential for the direct printing of optoelectronic devices. This review highlights a comprehensive overview of the progress that has been made in optoelectronics fabrication by the inkjet printing technique. The first part briefly covers the droplet-generation process in the nozzles of printheads and the physical properties affecting droplet formation and the profiles of the printed patterns. The second section outlines the recent activities related to applications of inkjet printing in optoelectronics fabrication including solar cells, light-emitting diodes, photodetectors and transparent electrodes. In each application field, the challenges with the inkjet printing process and the possible solutions are discussed before a few remarks. In the last section, a brief summary on the progress of inkjet printing fabrication of optoelectronics and an outlook for future research effort are presented.

Zinc oxide (ZnO) nanorods coated with silver (Ag) film on a polyethylene terephthalate (PET)flexible substrate were used as the photo anode for water splitting. The hybrid nanostructures were prepared via low-temperature hydrothermal growth and electron beam evaporation. The effects of plasmonic enhanced absorption, surface recombination inhibition and improved charge transport are investigated by varying the Ag thickness. Light trapping and absorption enhancement are further studied by optimizing the curvature of the PET substrates. The maximum short circuit current density (JSC, 0.616 mA cm -2) and the photoelectron conversion efficiency (PCE, 0.81%) are achieved with an optimized Ag film thickness of 10 nm and substrate bending radius of 6.0 mm. The maximum JSC and PCE are seven times and ten times, respectively, higher than those of the bare ZnO nanorods on flexible substrates without bending. The overall PEC performance improvement is attributed to the plasmonic effects induced by Ag film and improved charge transport due to inhibition of ZnO surface charge recombination. Enhanced light trapping (harvesting) induced by bending the PET substrates further improved the overall efficiency.