In wireless power transfer (WPT) system, communication between the primary and the secondary plays an important role in system status monitoring and operation control. Bidirectional information transmission is also essential to detect the working state and send control command in both sides. This paper proposes a bidirectional simultaneous wireless information and power transfer method. The secondary has a simple structure and employs only one switch. The proposed WPT system can achieve bidirectional information transmission via a sharing inductive link. The forward information is transferred by using a single full bridge inverter based on selected harmonic elimination PWM (SHEPWM) control methods without other high-frequency signal sources. In the secondary side, uncontrolled rectifier and a parallel MOSFET are adopted to realize constant voltage output and backward information transfer. The backward information modulation is achieved by changing the switching frequency of MOSFET. The forward and backward information demodulation modules are designed and analyzed in details. A 30W experiment platform with forward communication rate 5 kbps and backward communication rate 10 kbps is built to verify this proposed method. INDEX TERMS Amplitude shift keying, frequency shift keying, selected harmonic elimination, sharing inductive link, simultaneous wireless information and power transfer

Information transmission is often required in power transfer to implement control. In this paper, a Dual-Frequency Programmed Harmonic Modulation (DFPHM) method is proposed to transfer two frequencies carrying power and information with the single converter via a common inductive coil. The proposed method reduces the number of injection tightly coupled transformers used to transmit information, thereby simplifying the system structure and improving reliability. The performances of power and information transmission, and the method of information modulation and demodulation, as well as the principles of the control, are analyzed in detail. Then a simulation model is set up to verify the feasibility of the method. In addition, an experiment platform is established to verify that the single converter can transfer the power and information simultaneously via a common inductive coil without using tightly coupled transformers. INDEX TERMS Dual-frequency, full bridge, iteration algorithm, programmed harmonic modulation, wireless power and information transfer.

No abstract

No abstract

No abstract