sources at 1000 lux had an irradiance of 340 and 320 µW cm −2 , respectively. The accuracy of the light meter and power meter is the primary determinant of the uncertainty in the measured PCE values, which amounts to approximately ±6-7%, as can be determined from a straightforward uncertainty analysis based on the device testing conditions and the specifications of the power and light meters. Consequently, the PCE values are reported herein with 1 decimal place.

No abstract

In recent years, lead-free metal-halide perovskite photovoltaics has attracted ever-growing attention, in view of its potential to replicate the outstanding properties of lead-halide perovskite photovoltaics, but without the toxicity burden of the latter. Despite a research effort much smaller in scale than that pursued with lead-based perovskites, considerable progress has been achieved in lead-free perovskite photovoltaics, with the highest power conversion efficiencies now being in the region of 13%. In this Perspective, we first discuss the state of the art of lead-free perovskite photovoltaics and additionally highlight promising directions and strategies that could lead to further progress in material exploration and understanding as well as in photovoltaic efficiency. Furthermore, we point out the widespread lack of experimental data on the fundamental optoelectronic properties of lead-free halide perovskite absorbers (e.g., charge carrier mobility, defect parameters, Urbach energy, and the impact of dimensionality). All of this currently hampers a rational approach to further improving their performance and points to the need for a concerted effort that could bridge this knowledge gap. Additionally, this Perspective brings to the fore the manifold photovoltaic opportunities—thus far largely unexplored with lead-free perovskite absorbers—beyond single-junction outdoor photovoltaics, which may potentially enable the realization of their full potential. The exploration of these opportunities (tandem photovoltaics, indoor photovoltaics, and building-integrated and transparent photovoltaics) could energize the investigation of existing and new classes of lead-free perovskite absorbers beyond current paradigms and toward high photovoltaic performance.

The formidable rise of lead‐halide perovskite photovoltaics has energized the search for lead‐free perovskite‐inspired materials (PIMs) with related optoelectronic properties but free from toxicity limitations. The photovoltaic performance of PIMs closely depends on their defect tolerance. However, a comprehensive experimental characterization of their defect‐level parameters—concentration, energy depth, and capture cross‐section—has not been pursued to date, hindering the rational development of defect‐tolerant PIMs. While mainstream, capacitance‐based techniques for defect‐level characterization have sparked controversy in lead‐halide perovskite research, their use on PIMs is also problematic due to their typical near‐intrinsic character. This study demonstrates on four representative PIMs (Cs3Sb2I9, Rb3Sb2I9, BiOI, and AgBiI4) for which Photoinduced Current Transient Spectroscopy (PICTS) offers a facile, widely applicable route to the defect‐level characterization of PIMs embedded within solar cells. Going beyond the ambiguities of the current discussion of defect tolerance, a methodology is also presented to quantitatively assess the defect tolerance of PIMs in photovoltaics based on their experimental defect‐level parameters. Finally, PICTS applied to PIM photovoltaics is revealed to be ultimately sensitive to defect‐level concentrations <1 ppb. Therefore, this study provides a versatile platform for the defect‐level characterization of PIMs and related absorbers, which can catalyze the development of green, high‐performance photovoltaics.

In article number 2002761, Robert L. Z. Hoye, Vincenzo Pecunia, and co‐workers demonstrate that lead‐free perovskite‐inspired materials are particularly attractive for low‐toxicity indoor photovoltaics. This finding is expected to encourage future efforts for their exploration in the context of sustainably powering the Internet of Things ecosystem–as found in smart homes, where people can seamlessly interact with all types of smart devices for greater comfort and safety.