The recent advances in the preparation, physical properties and applications of liquid marbles, especially operations and floating abilities, are summarized.

When a droplet contacts a solid surface, the liquid spreads over the solid surface to minimize the total surface energy. This phenomenon is widespread in industrial production and nature, so research on droplet spreading is of great significance. Here, the adhesion force and the spreading radius during droplet spreading can be quantified using a highly sensitive photoelectric method. It is possible to study droplet spreading from two dimensions at the microscale. The adhesion force is measured by an optical lever, and the spreading radius is measured by an ultrafast electrical method. The measurement method allows the force resolution and the space−time resolution to reach the nanonewton lever and the nanosecond lever, respectively. We obtain the maximum spreading radius and the maximum adhesion force during short-time spreading through our technique. Moreover, we numerically simulate the droplet spreading process through the lattice Boltzmann solver and confirm the observed results. This study provides a new experimental technique for studying droplet spreading dynamics from multiple perspectives, which can deepen our understanding of droplet spreading and provide guidance for the development of new techniques.

Coalescence-induced droplet jumping has great prospects in many applications. Nevertheless, the applications are vastly limited by a low jumping velocity. Conventional methods to enhance the droplet coalescence jumping velocity are enabled by protruding structures with superhydrophobic surfaces. However, the jumping velocity improvement is limited by the height of protruding structures. Here, we present rationally designed limitation structures with superhydrophobic surfaces to achieve a dimensionless jumping velocity, V j * ≈ 0.64. The mechanism of enhancing the jumping velocity is demonstrated through the study of numerical simulations and geometric parameters of limitation structures, providing guidelines for optimized structures. Experimental and numerical results indicate that the mechanism consists of the combined action of the velocity vectors' redirection and the Laplace pressure difference within deformed droplets trapped in limitation structures. On the basis of previous research on the mechanisms of protruding structures and our study, we successfully exploited those mechanisms to further improve the jumping velocity by combining the limitation structure with the protruding structure. Experimentally, we attained a dimensionless jumping velocity of V j * ≈ 0.74 with an energy conversion efficiency of η ≈ 48%, breaking the jumping velocity limit. This work not only demonstrates a new mechanism for achieving a high jumping velocity and energy conversion efficiency but also sheds lights on the effect of limitation structures on coalescence hydrodynamics and elucidates a method to further enhance the jumping velocity based on protruding structures.

The measurement of the droplets’ elasticity is vitally important in microfluidic and ink-jet printing. It refers to the ability of the droplet to restore its original shape and strong robustness. This study investigated a novel method to measure elasticity. The plate coated with super-hydrophobic layers pressed on a droplet and the elastic force was recorded by an electronic balance. Meanwhile, a mathematical model was constructed to calculate the changes of the droplet area under the force. The measurement showed that external work mainly converts into surface energy and the damping ratio increases from 0.068 to 0.261 with the increase of mass fraction from 0 to 80 wt%. It also indicates that the novel method can accurately and efficiently measure the elasticity of droplets.