A structure denoted as a "bubble-nanorod composite" is synthesized by introducing the Kirkendall effect into the electrospinning method. Bubble-nanorod-structured Fe2O3-C composite nanofibers, which are composed of nanosized hollow Fe2O3 spheres uniformly dispersed in an amorphous carbon matrix, are synthesized as the target material. Post-treatment of the electrospun precursor nanofibers at 500 °C under 10% H2/Ar mixture gas atmosphere produces amorphous FeOx-carbon composite nanofibers. Post-treatment of the FeOx-carbon composite nanofibers at 300 °C under air atmosphere produces the bubble-nanorod-structured Fe2O3-C composite nanofibers. The solid Fe nanocrystals formed by the reduction of FeOx are converted into hollow Fe2O3 nanospheres during the further heating process by the well-known Kirkendall diffusion process. The discharge capacities of the bubble-nanorod-structured Fe2O3-C composite nanofibers and hollow bare Fe2O3 nanofibers for the 300th cycles at a current density of 1.0 A g(-1) are 812 and 285 mA h g(-1), respectively, and their capacity retentions measured from the second cycle are 84 and 24%, respectively. The hollow nanospheres accommodate the volume change that occurs during cycling. The unique structure of the bubble-nanorod-structured Fe2O3-C composite nanofibers results in their superior electrochemical properties by improving the structural stability during long-term cycling.

Edge-exposed MoS2 nano-assembled structures are designed for high hydrogen evolution reaction activity and long term stability. The number of sulfur edge sites of nano-assembled spheres and sheets is confirmed by Raman spectroscopy and EXAFS analysis. By controlling the MoS2 morphology with the formation of nano-assembled spheres with the assembly of small-size fragments of MoS2, the resulting assembled spheres have high electrocatalytic HER activity and high thermodynamic stability.

No abstract

In this work, we reported a facile approach to prepare a uniform copper ferrite nanoparticle-attached graphene nanosheet (CuFe2O4-GN). A one-step solvothermal method featuring the reduction of graphene oxide and formation of CuFe2O4 nanoparticles was efficient, scalable, green, and controllable. The composite nanosheet was fully characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), which demonstrated that CuFe2O4 nanoparticles with a diameter of approximately 100 nm were densely and compactly deposited on GN. To investigate the formation mechanism of CuFe2O4-GN, we discussed in detail the effects of a series of experimental parameters, including the concentrations of the precursor, precipitation agent, stabilizer agent, and graphene oxide on the size and morphology of the resulting products. Furthermore, the electrochemical properties of the CuFe2O4-GN composite were studied by cyclic voltammetry and galvanostatic charge-discharge measurements. The composite showed high electrochemical capacitance (576.6 F·g(-1) at 1 A·g(-1)), good rate performance, and cycling stability. These results demonstrated that the composite, as a kind of electrode materials, had a high specific capacitance and good retention. The versatile CuFe2O4-GN holds great promise for application in a wide range of electrochemical fields because of the remarkable synergistic effects between CuFe2O4 nanoparticles and graphene.

No abstract