Users often need to control and monitor the environmental variables of their homes, even when they are not at home. In this paper, we present a multifunctional, low-cost, and flexible system for smart home control and environmental monitoring. This system employs an embedded micro web server based on an Arduino Yún microcontroller with Internet connectivity that allows remote device control. The proposed system can be controlled via the Internet through an Android-based mobile app. To guarantee access regardless of Internet availability, the proposed system can also be controlled via standalone manual operation using a touch display. The proposed system transmits sensor data to a cloud platform and can receive commands from the server, allowing many devices to be automatically controlled. To demonstrate the feasibility and effectiveness of this system, devices such as light switches, power plugs, and various sensors, including temperature, gas, 2.5-µm particulate matter (PM2.5) and motion sensors, were integrated into a prototype of the proposed home control system. Finally, we implemented the prototype in a model home to validate the flexibility, scalability, usability and reliability of the system. INDEX TERMS Microcontroller, smart home, Arduino, the Internet of Things (IoT).

We present a wearable device built on an Adafruit Circuit Playground Express (CPE) board and integrated with a photoplethysmographic (PPG) optical sensor for heart rate monitoring and multiple embedded sensors for medical applications—in particular, sleep physiological signal monitoring. Our device is portable and lightweight. Due to the microcontroller unit (MCU)-based architecture of the proposed device, it is scalable and flexible. Thus, with the addition of different plug-and-play sensors, it can be used in many applications in different fields. The innovation introduced in this study is that with additional sensors, we can determine whether there are intermediary variables that can be modified to improve our sleep monitoring algorithm. Additionally, although the proposed device has a relatively low cost, it achieves substantially improved performance compared to the commercially available Philips ActiWatch2 wearable device, which has been approved by the Food and Drug Administration (FDA). To assess the reliability of our device, we compared physiological sleep signals recorded simultaneously from volunteers using both our device and ActiWatch2. Motion and light detection data from our device were shown to be correlated to data simultaneously collected using the ActiWatch2, with correlation coefficients of 0.78 and 0.89, respectively. For 7 days of continuous data collection, there was only one instance of a false positive, in which our device detected a sleep interval, while the ActiWatch2 did not. The most important aspect of our research is the use of an open architecture. At the hardware level, general purpose input/output (GPIO), serial peripheral interface (SPI), integrated circuit (I2C), and universal asynchronous receiver-transmitter (UART) standards were used. At the software level, an object-oriented programming methodology was used to develop the system. Because the use of plug-and-play sensors is associated with the risk of adverse outcomes, such as system instability, this study heavily relied on object-oriented programming. Object-oriented programming improves system stability when hardware components are replaced or upgraded, allowing us to change the original system components at a low cost. Therefore, our device is easily scalable and has low commercialization costs. The proposed wearable device can facilitate the long-term tracking of physiological signals in sleep monitoring and related research. The open architecture of our device facilitates collaboration and allows other researchers to adapt our device for use in their own research, which is the main characteristic and contribution of this study.

Emergency care is a critical area of medicine whose outcomes are influenced by the time, availability, and accuracy of contextual information. The success of critical or emergency care is determined by the quality and accuracy of the information received during the emergency call and the data collected during emergency transportation. The Internet of Things (IoT) consists of many smart devices and components that communicate via their connection to the Internet, which is used to collect data with sensors that obtain personal health parameters. In the past, most health measurement systems were based on a single dedicated orientation, and few systems had multiple devices on the same platform. In addition to traditional health measurement technologies, most such systems use centralized data transmission, which means that health measurement data have become the exclusive intellectual asset of the system developer. Therefore, this study develops an IoT-based message-broker system that is deployed and demonstrated for five health devices: blood oxygen, blood pressure, forehead temperature, body temperature, and body weight sensors. A central controller accessed by radio-frequency identification (RFID) collects clients’ health profiles on the cloud platform. All collected data can be quickly shared, analyzed, and visualized, and the health devices can be changed, added to, and removed reliably when the requirements change. Additionally, following the message queuing telemetry transport (MQTT) protocol, all devices can communicate with each other and be integrated into a higher-level health measurement standard (such as blood pressure plus weight or body temperature plus blood oxygen). We implement a smart healthcare monitoring system (SHMS) and verify its reliability. We use MQTT to establish an open communication format that other organizations can follow to perform individual patient vital sign monitoring in potential applications. The robustness and flexibility of this research can be verified through the addition of other systems. Through this structure, more large-scale health detection devices can be integrated into the method proposed in this research in the future. Personal RFID or health insurance cards can be used for personal services or in medical institutions, and the data can easily be shared through the mechanism of this research. Such information sharing will enable the utilization of medical resources to be maximized.

No abstract

In the public health domain, healthcare systems are a crucial part of the economy, transportation, education, health infrastructure, and military of any country. In this study, a system is proposed to implement smart people management, monitoring, and tracking processes that can be used in hospitals to automate and organize information management. For disease management in a public setting, measuring forehead temperatures is a standard method of identifying people for further treatment. To prevent disease transmission on campuses or in any public space, daily temperature checks for everyone have been mandated at the entrances to many public spaces. Although this task can be performed in seconds for an individual, substantial human resources are required to perform temperature checks for all people arriving at one or more specified checkpoints each day during an epidemic. As a result, a smart measuring, monitoring, and management system is urgently needed. We propose a complete solution that includes current Internet of Things technology that can be used in hospitals or any public space to automate and organize information management operations. This system offers a cost-effective means of enhancing reliability, privacy, and security for healthcare record management. One attractive feature of the system is its low cost due to the use of off-the-shelf devices and sensors that can be sourced and operated in our region. Recorded measurements of vital sig/ns are presented via a compact, user-friendly interface that can be monitored remotely. Because the proposed solution is based on mature existing hardware modules and software packages, any experienced information technology professional can quickly build an analogous monitoring and management system by following the instructions presented in this paper.