The development of portable, real-time, and cheap platforms to monitor ultratrace levels of explosives is of great urgence and importance due to the threat of terrorism attacks and the need for homeland security. However, most of the previous chemiresistor sensors for explosive detection are suffering from limited responses and long response time. Here, a transition-metal-doping method is presented to remarkably promote the quantity of the surface defect states and to significantly reduce the charge transfer distance by creating a local charge reservoir layer. Thus, the sensor response is greatly enhanced and the response time is remarkably shortened. The resulting sensory array can not only detect military explosives, such as, TNT, DNT, PNT, PA, and RDX with high response, but also can fully distinguish some of the improvised explosive vapors, such as AN and urea, due to the huge response reaching to 100%. Furthermore, this sensory array can discriminate ppb-level TNT and ppt-level RDX from structurally similar and high-concentration interfering aromatic gases in less than 12 s. Through comparison with the previously reported chemiresistor or Schottky sensors for explosive detection, the present transition-metal-doping method resulting ZnO sensor stands out and undoubtedly challenges the best.

Relevant fundamentals of the electrochemical double layer and supercapacitors utilizing the interfacial capacitance as well as superficial redox processes at the electrode/solution interface are briefly reviewed. Experimental methods for the determination of the capacity of electrochemical double layers, of charge storage electrode materials for supercapacitors, and of supercapacitors are discussed and compared. Intrinsic limitations and pitfalls are indicated; popular errors, misconceptions, and mistakes are evaluated. The suitability of available methods is discussed, and practical recommendations are provided.

No abstract