No abstract

In this paper, a light-controlled variable damping system (LCVDS) is proposed based on PLZT ceramics and electrorheological fluid (ERF). The mathematical models for the photovoltage of PLZT ceramics and the hydrodynamic model for the ERF are established, and the relationship between the pressure difference at both ends of the microchannel and the light intensity is deduced. Then, simulations are conducted by applying different light intensities in the LCVDS to analyze the pressure difference at both ends of the microchannel using COMSOL Multiphysics. The simulation results show that the pressure difference at both ends of the microchannel increases with the increase in light intensity, which is consistent with results from the mathematical model established in this paper. The error rate of the pressure difference at both ends of the microchannel is within 13.8% between the theoretical and simulation results. This investigation lays the foundation for the application of light-controlled variable damping in future engineering.

A model of photovoltaic-electrostatic cantilever beam based on lanthanum-modified lead zirconate titanate ceramic is proposed in this article. New equivalent electrical model of lanthanum-modified lead zirconate titanate ceramic connected to a parallel plate composed of two copper foils is obtained by modifying the original lanthanum-modified lead zirconate titanate equivalent electrical model. After that, the mathematical model of photovoltaic-electrostatic cantilever beam is established. Furthermore, the influences of ultraviolet light intensity and copper foil length on the deflection of the photovoltaic-electrostatic cantilever beam are analyzed via the theoretical and experimental methods. The analysis results indicate that the deflection at the free end of cantilever beam increases with the increase in light intensity and length of the copper foil. The photovoltaic-electrostatic flexible cantilever beam can be taken as a micro-actuator with the advantages of remote control and clean drive.

Firstly, the expression of PLZT ceramic driving voltage is obtained with external load. Furthermore, the hydrodynamic modelling of the electrorheological fluid in the circular damping channel is carried out, and the relationship between the pressure difference between the two ends of the damping channel and the PLZT ceramic driving voltage is derived, and the hydrodynamic simulation of the electrorheological fluid in the circular damping channel was carried out in the fluid simulation software Fluent. The simulation result shows the correctness of the mathematic model and the feasibility of photo-controlled electrorheological damper.

No abstract