No abstract

The low temperature combustion regime (LTC) has been known to simultaneously reduce both NOx and smoke emissions. The concept is to burn the fuel vapor-air charge, low in oxygen concentration, at low temperatures to reduce the formation of both NOx and smoke emissions. The paper investigates two combustion concepts in the LTC regime, the MK (modulated kinetics) and the smokeless locally rich diesel combustion and proposes a new strategy for a further reduction in emissions with minimum penalty in fuel economy. Tests were carried out under simulated turbo charged conditions on a single cylinder, small bore HSDI diesel engine with a re-entrant bowl combustion chamber. The engine is equipped with a common rail fuel injection system. Tests covered a wide range of injection pressures, EGR rates, injection timings and swirl ratios to determine their individual and collective contributions in engine-out emissions and fuel economy within this combustion regime. The proposed strategy is based on the results of this experimental investigation.

No abstract

This paper introduces a phenomenological model for the fuel distribution, combustion, and emissions formation in the small bore, high speed direct injection diesel engine. A differentiation is made between the conditions in large bore and small bore diesel engines, particularly regarding the fuel impingement on the walls and the swirl and squish gas flow components. The model considers the fuel injected prior to the development of the flame, fuel injected in the flame, fuel deposited on the walls and the last part of the fuel delivered at the end of the injection process. The model is based on experimental results obtained in a single-cylinder, 4-valve, direct-injection, four-stroke-cycle, water-cooled, diesel engine equipped with a common rail fuel injection system. The engine is supercharged with heated shop air, and the exhaust back pressure is adjusted to simulate actual turbo-charged diesel engine conditions. The experiments covered a wide range of injection pressures, EGR rates, injection timings and swirl ratios. Correlations and 2-D maps are developed to show the effect of combinations of the above parameters on engine out emissions. Emphasis is made on the nitric oxide and soot measured in Bosch Smoke Units (BSU).