To investigate the effect of polyurea on the protective performance of a steel target plate under the combination of shock wave and fragments, the failure characteristics, damage process and micro mechanism of the polyurea coated steel plates with different coating methods under the combination of explosion shock waves and fragments were analyzed through experiments and numerical simulations. The results showed that single-sided coatings aggravated the damage of target plate when the coating thickness was 2 mm. While the polyurea thickness greater than 4 mm could significantly reduce the damage degree of the steel plate. When the polyurea was coated on the double sides, it would aggravate the damage, no matter how thick the polyurea was. Through microscopic research, it was found that the front coated polyurea was severely ablated by detonation products, which greatly reduce its energy absorption efficiency. The polyurea coated on the back underwent tensile fracture under the influence of tensile stress wave. The breaking of intramolecular hydrogen bond of polyurea was the key to the energy absorption of polyurea.

The mechanical properties of (Cu0.47Zr0.45Al0.08)98Dy2 bulk metallic glass (BMG) were characterized under various strain rates by quasi-static and dynamic compressive tests. In the quasi-static compressive tests, the yield stress of (Cu0.47Zr0.45Al0.08)98Dy2 BMG increased from 1234 MPa to 1844 MPa when the strain rate was increased from 0.001 s−1 to 0.01 s−1, and the yield stress decreased to 1430 MPa at the strain rate of 0.1 s−1. In the dynamic compressive tests, when the strain rate increased from 1550 s−1 to 2990 s−1, the yield stress of (Cu0.47Zr0.45Al0.08)98Dy2 BMG first decreased from 1508 MPa to 1404 MPa, and then increased to 1593 MPa. The fracture behaviors of (Cu0.47Zr0.45Al0.08)98Dy2 BMG were studied by using scanning electron microscopy to examine the fracture surface. Fracture occurred in the pure shear mode with strain rates below 2100 s−1, whereas shear fracture and normal fracture occurred simultaneously under strain rates of 2650 s−1 and 2990 s−1.