Vehicular communication networks is a powerful tool that enables numerous vehicular data services and applications. The rapid growth in vehicles has also resulted in the vehicular network becoming heterogeneous, dynamic, and large-scale, making it hard to meet the strict requirements, such as extremely latency, high mobility, top security, and enormous connections of the fifth-generation network. Previous studies have shown that with the increase in the application of Software-Defined Networking (SDN) on Vehicular Ad-hoc Network (VANET) in industries, researchers have exerted considerable efforts to improve vehicular communications. This study presents an exhaustive review of previous works by classifying them based on based on wireless communication, particularly VANET. First, a concise summary of the VANET structure and SDN controller with layers and details of their infrastructure is provided. Second, a description of SDN-VANET applications in different wireless communications, such as the Internet of Things (IoT) and VANET is provided with concentration on the examination and comparison of SDN-VANET works on several parameters. This paper also provides a detailed analysis of the open issues and research directions accomplished while integrating the VANET with SDN. It also highlights the current and emerging technologies with use cases in vehicular networks to address the several challenges in the VANET infrastructure. This survey acts as a catalyst in raising the emergent robustness routing protocol, latency, connectivity and security issues of future SDN-VANET architectures. INDEX TERMS Vehicular ad hoc network (VANET), SDN, 5G, Internet of Vehicles (IoV), routing protocol, connectivity, mobility management, security.
This study proposed the use of coplanar waveguide Ultrawide-band strawberry artistic shaped printed monopole (SAPM) antenna with a single-layer frequency selective surface (FSS) as the metallic plate to improve the gain of antenna application. The intersection of six cylinders is used to structure the strawberry artistic shaped radiating element, which leads to enhancing the antenna bandwidth. The proposed FSS reflectors used a 10 × 10 array with the unit cell of 6mm × 6mm in introducing a center-operating frequency. This study used the FR4 substrate with coplanar waveguide (CPW) fed to print the proposed antenna, which provided a wide impedance bandwidth of 8.85 GHz (3.05-11.9GHz) that covers the licensed Ultrawide-band. The proposed FSS transmitted a stop-band transmission coefficient, which is below −10 dB with the linear reflection phase over the bandwidth in the range from 3.05 GHz to 11.9 GHz. The UWB SAPM antenna with FSS reflector showed an improvement from 1.65 dB to 7.87 dB in the lower band and 6.3 dB to 9.68 dB in the upper band with an enhancement of 6.22 dB. The gain value is enhanced by the gaping between the antenna and FSS, which has an approximately constant gain response through the band, the gain is sustained among 7.87 dB to 9.68 dB. The total dimension of the antenna is 61mm×61mm×1.6 mm. The proposed antenna structure provides the directional and balanced far-field pattern, which is suitable for Ultrawide-band (UWB) applications and ground-penetrating radar (GPR) applications. INDEX TERMS UWB SAPM antenna, FSS reflector, gain, reflection phase, FSS array, stop-band.
Recent developments in the field of microwave planar sensors have led to a renewed interest in industrial, chemical, biological and medical applications that are capable of performing real-time and non-invasive measurement of material properties. Among the plausible advantages of microwave planar sensors is that they have a compact size, a low cost and the ease of fabrication and integration compared to prevailing sensors. However, some of their main drawbacks can be considered that restrict their usage and limit the range of applications such as their sensitivity and selectivity. The development of high-sensitivity microwave planar sensors is required for highly accurate complex permittivity measurements to monitor the small variations among different material samples. Therefore, the purpose of this paper is to review recent research on the development of microwave planar sensors and further challenges of their sensitivity and selectivity. Furthermore, the techniques of the complex permittivity extraction (real and imaginary parts) are discussed based on the different approaches of mathematical models. The outcomes of this review may facilitate improvements of and an alternative solution for the enhancement of microwave planar sensors’ normalized sensitivity for material characterization, especially in biochemical and beverage industry applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.