Strong coupling in an inductive power transfer (IPT) system will lead to difficulties in power control and loss of soft switching conditions. This paper presents an IPT system that can decouple the converter from the resonant network. In the proposed system, the energy transmission process is divided into energy injection stage and free resonance stage. In the energy injection stage, the inductor is separated from the resonance network, and the power source injects energy into the inductor independently. In the free resonance stage, the inductor is connected to the resonance network for resonating. As a benefit from the decoupling of the converter from the resonance network, the proposed IPT system is characterized by easy power control and soft switching operation. A prototype was built for experiments. The experimental results show that with a supply voltage of 300 V, coupling factor of 0.2, and load resistance of 10 Ω, the output power can be controlled nearly linearly by the time of the energy injection stage in a range of 40–60 μs, and the system works under soft switching conditions.

The detection of oil in water is of great importance for maintaining subsurface infrastructures such as oil pipelines. As a potential technology for oceanic application, an oceanic lidar has proved its advantages for remote sensing of optical properties and subsea materials. However, current oceanic lidar systems are highly power-consuming and bulky, making them difficult to deploy underwater to monitor oil in water. To address this issue, we have developed a compact single-photon Raman lidar by using a single-photon detector with high quantum efficiency and low dark noise. Due to the single-photon sensitivity, the detection of the relatively weak Raman backscattered signal from underwater oil was realized with a laser with a pulse energy of 1 µJ and a telescope with a diameter of 22.4 mm. An experimental demonstration was conducted to obtain the distance-resolved Raman backscatter of underwater oil of different thicknesses up to a distance of 12 m. The results indicate the single-photon Raman lidar’s potential for inspecting underwater oil pipelines.

An automatic stage transition converter for an inductive power transfer system is presented in this paper. An effective control strategy with two working stages of independent energy injection stage and free resonance stage is employed in the proposed converter. With the automatic stage transition strategy, when the frequency of the resonance network changes, the ending time of the free resonance stage is automatically determined. At the same time, the phase angle of the free resonance stage is automatically set as half a resonant cycle. As the stage transition is not triggered by the switches, the switch motion can be executed in advance of the transition moments. Time margins are offered for every switch in the converter, which make the switching moments of the switches flexible and the control simple. Another feature of this converter is that during the energy injection stage, the energy is injected into the inductor independently. Therefore, the input power can be easily regulated by adjusting the energy injection time. A prototype for the converter and the inductive power transfer system was implemented experimentally. From the experimental results, the automatic stage transition and power regulation capability of the proposed converter are verified. The switches all operated at the soft switch condition. When the energy injection time was adjusted from 10 μs to 25 μs, the output power changed from 143 W to 740 W.

In order to compensate the large leakage inductance and improve the power transmission capacity, capacitors are widely used in inductive power transfer (IPT) systems, which results in high voltage or current stresses in the resonant tanks and limits higher volt-ampere (VA) rating of the transfer power, especially in medium and low frequency applications. This paper presents a symmetrical half-bridge resonant converter (SHRC) for series-series/series compensated IPT systems with detailed analysis and design. It operates at a relatively low frequency of 12.5 kHz, suitable for IGBT applications. The theoretical analysis shows that, compared with full-bridge resonant converter (FRC) for IPT, the symmetrical half-bridge resonant converter achieves a higher efficiency. Simulation and a prototype of 1500 W power output were built to verify the theoretical analysis. The experimental results show that the power loss of SHRC is 39.7 W while that of FRC is 79.4 W, which is consistent with the theoretical analysis. The global efficiency of the IPT based on the proposed converter is 91.6%.

No abstract