To test the hypothesis that by intentionally inducing swirling flow in an endovascular stent, hemodynamic performance of the stent can be improved, we numerically analyzed the flow characteristics in a simplified model of a stent within a straight segment of an artery in which swirling flow was introduced intentionally. The study was designed with two purposes: 1) to investigate whether swirling flow is beneficial to suppress flow disturbance in the stent; and 2) to determine the minimum helical strength of the swirling flow required in the design of a swirling flow stent. The numerical simulation showed that the swirling flow indeed reduced the size of the disturbed flow zones, enhanced the average wall shear stress, and lowered oscillatory shear index in the stent, which have been believed to be adverse factors involved in the development of arterial restenosis after stent deployment. The minimum inlet helicity density (or strength) of the swirling flow required was approximately 6.5 m/s(2). Based on the study, it is also believed that a stent with a structure that possesses intrinsic characteristics to automatically induce swirling flow in the stent is better than a stent with a front swirling flow inducer in terms of hemodynamics.

The size mismatch in an end-to-end vascular anastomosis between the host vessel and the graft may cause flow disturbance and possibly result in thrombosis. To test the hypothesis that intentionally induced swirling flow in an end-to-end anastomosis could suppress flow disturbance, impeding thrombus formation by affecting platelets adhesion, a comparative study was designed to investigate the effect of swirling flow on the adhesion and activation of platelets in a glass sudden tubular expansion tube coated with calf skin type I collagen. The results revealed that the swirling flow generated in the expansion could reduce the length of the flow recirculation zone distal to the expansion and significantly reduce the total number of adherent platelets in the test tube when compared with that for the normal flow. No significant difference was observed in the activation of platelets between the swirling flow group and the normal flow group. This study therefore suggests that intentionally introduced swirling flow in an end-to-end anastomosis has no adverse effect on platelet activation and may indeed be a solution to improve the patency of end-to-end microvascular anastomoses by suppressing thrombus formation.

Traditional commercial stents are made of wires with square or semi-circular cross-sections that lead to flow disturbance, which plays an important role in the initiation and progression of restenosis. A new stent with streamlined cross-sectional wires was proposed and researched numerically for its hemodynamic performance. Simplified models of stents with square, semi-circular, or streamlined cross-sectional wires were constructed numerically. Blood flows in the three models were simulated using computational fluid dynamics methods, and compared in terms of flow pattern, wall shear stress (WSS), and oscillating shear index (OSI). The results showed that when compared with the two traditional stents, the new stent with streamlined cross-sectional wires induced almost no flow disturbance, significantly enhanced WSS, and reduced the value of OSI within the stent. The present preliminary study indicates that the optimization of the cross-sectional shape of stent wires ought to be considered in the structural design for endovascular stents.

No abstract

Background: Gender difference in cardiovascular diseases (CVDs) is an important topic in the field of cardiovascular medicine. In this study, we focused on the mortality difference of abdominal aortic aneurysms (AAA), which is higher for female than that of male. The aim of this study was to verify whether morphological and hemodynamic factors play their roles in this phenomenon. Methods: Patient-specific AAA models of 11 females and 23 males with similar age and body mass index (BMI) have been reconstructed based on clinical computed tomography (CT) data. Firstly, the morphological parameters (diameters, curvature, intraluminal thrombus volume, etc.) of AAA models and lumbar vertebrae models were collected and analyzed. Then, based on statistical results of morphological parameters, uniformed male and female AAA models were reconstructed, and hemodynamic simulations were conducted respectively. In post-processing, the hemodynamic performances induced by gender-different morphological geometries were analyzed and compared. Results: The comparison of morphological parameters revealed that the average curvature of lumbar vertebrae and AAA centerline of female AAA models were obviously higher than that of the male. The amount of intraluminal thrombus in female AAA models was relatively lower than that of the male. According to the hemodynamic simulation, the uniform female AAA model has higher peak pressure, lower oscillatory shear stress index (OSI), and lower relative residence time (RRT) than that of the male model, all of which put female AAA to a relatively higher risk hemodynamic situation. Conclusions: The morphological and hemodynamic features of AAA have very obvious gender differences that would induce higher risk of rupture for female AAA biomechanically. These findings would help to explore the mechanism of gender differences in AAA and draw attention to gender-specific consideration for AAA treatment. More morphological and hemodynamic indictors are suggested to be involved in the future guidelines.