Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensile ductility that surpasses that of conventional 316L steels. High strength is attributed to solidification-enabled cellular structures, low-angle grain boundaries, and dislocations formed during manufacturing, while high uniform elongation correlates to a steady and progressive work-hardening mechanism regulated by a hierarchically heterogeneous microstructure, with length scales spanning nearly six orders of magnitude. In addition, solute segregation along cellular walls and low-angle grain boundaries can enhance dislocation pinning and promote twinning. This work demonstrates the potential of additive manufacturing to create alloys with unique microstructures and high performance for structural applications.

Bulk graphene (reduced graphene oxide)-reinforced Al matrix composites with a bioinspired nanolaminated microstructure were fabricated via a composite powder assembly approach. Compared with the unreinforced Al matrix, these composites were shown to possess significantly improved stiffness and tensile strength, and a similar or even slightly higher total elongation. These observations were interpreted by the facilitated load transfer between graphene and the Al matrix, and the extrinsic toughening effect as a result of the nanolaminated microstructure.

Reactions with the unstable and highly reactive zwitterionic intermediates generated in processes catalysed by transition metals are providing new opportunities for molecular constructions. Insertion reactions involve the collapse of zwitterionic intermediates, but trapping them would allow structural elaborations that are not currently available. To synthesize complex molecules in this manner, reactive electrophiles can be used to trap the zwitterionic intermediates. Here, we describe the use of imines, activated by chiral organocatalysts, and a highly efficient integrated rhodium and chiral Brønsted acid co-catalysed process to trap zwitterionic intermediates that have been proposed previously to undergo a formal C-H insertion reaction, allowing us to obtain polyfunctionalized indole and oxindole derivatives in a single step with excellent diastereoselectivity and enantioselectivity.

The excellent properties of graphene promote it as an ideal reinforcement in composites. However, dispersing graphene homogenously into metals is a key challenge that limits the development of high-performance graphene-reinforced metal matrix composites. Here, via simple electrostatic interaction between graphene oxide (GO) and Al flakes, uniform distribution of reduced graphene oxide (RGO) in an Al matrix is achieved. The adsorption process of GO on Al flakes is efficient, as it can be completed in minutes and proceeds spontaneously without any chemical agents. GO can be partially reduced by the electron interchange during the adsorption process and could be thoroughly reduced after subsequent thermal annealing. A densified RGO/Al composite can be obtained by hot pressing the RGO/Al composite powders. By employing the preceding fabrication process, a composite reinforced with only 0.3 wt.% of RGO shows an 18 and 17% increase in elastic modulus and hardness, respectively, over unreinforced Al, demonstrating RGO is a better reinforcement than most other reinforcements.

No abstract