How to predict the relationship among particle size and among product size, to establish the relationship between the granularity and working parameters in the process of grinding and to determine the optimum operating parameters. With proposing BS squeeze crush model by L. Bass and the idea of roll surface division as the material uneven extrusion force are adopted. Based on field experiments the experimental data is analyzed, the select function and the breakage functions are fitted with MATLAB software, and obtaining their model. The comminution model is determined by the roller division. We obtain the model parameter through the experimental data. Through model analysis shows: the relationship between particle breakage and energy absorption, namely the smaller size of the same power, the lower broken; the breakage diminishes with the decrease of particle size ratio and it will be tending to a small constant when the smaller particle size ratio. The breakage functions rapidly decrease within ratio of between 0.2-0.7. This shows: the energy consumption will rapidly increase when the particle size of less than 0.2 in broken; the selection diminish with the decrease of particle size. Pressure (8-9MPa) should be the most appropriate value.

With the development of oil field production demand today, pumping unit is developing towards the direction of energy saving, intelligent. According to the present status of the oilfield, this paper designed a kind of intelligent energy saving pumping unit system, the system acceleration and deceleration process is very short, most of their working time in uniform motion in a stroke, and the beam pumping unit has been alternating deceleration process all the time compared with good energy saving effect. Energy store system is designed, the system not only reduces energy consumption, and make the motors can be started with initial velocity, shorten the motor start-up time, the motor starting current is stable running current of 4 to 7 times, so that reduces the starting current impact. To test this idea, modeling of motor, and the simulation analysis, the results confirmed the idea very well. Finally, in the principle of the pumping unit system prototype experiments, the experimental results show that the pumping unit system has significant energy-saving effect and the intelligent characteristics.

In the drilling process, axial vibration, transverse vibration and torsional vibration happen to drilling string. And the coupled vibration is more complex. In the resonance state, drilling string collides with the wall, which causes serious damage on drilling string in a short time and results in economic loss to the drilling operation. In this paper, the regularity of coupled vibration is analyzed by using finite element method. The model of full-hole drilling strings is established. The distribution regularities of coupled resonant frequency are obtained through computer analysis. The coupled model is more accurate than single vibration model. And the gaps of high rotary speed resonance regions are larger. Resonance state can be avoided by changing rotary speed, and drilling accidents can be reduced.