No abstract

A fully integrated CMOS differential power amplifier driver (PAD) is proposed for WiMAX applications. In order to fulfill the differential application requirements, a transmission line transformer is used as the output matching network. A differential inductance constitutes an inter-stage matching network. Meanwhile, an on chip balun realizes input matching as well as single-end to differential conversion. The PAD is fabricated in a 0.13 m RFCMOS process. The chip size is 1.1 1.1 mm 2 with all of the matching network integrated on chip. The saturated power is around 10 dBm and power gain is about 12 dB.

This paper presents a novel field-programmable analog array (FPAA) architecture featuring a dual mode including discrete-time (DT) and continuous-time (CT) operation modes, along with a highly routable connection boxes (CBs) based interconnection lattice. The dual mode circuit for the FPAA is capable of achieving targeted optimal performance in different applications. The architecture utilizes routing switches in a CB not only for the signal interconnection purpose but also for control of the electrical charge transfer required in switched-capacitor circuits. This way, the performance of the circuit in either mode shall not be hampered with adding of programmability. The proposed FPAA is designed and implemented in a 0.18 μm standard CMOS process with a 3.3 V supply voltage. The result from post-layout simulation shows that a maximum bandwidth of 265 MHz through the interconnection network is achieved. The measured results from demonstrated examples show that the maximum signal bandwidth of up to 2 MHz in CT mode is obtained with the spurious free dynamic range of 54 dB, while the signal processing precision in DT mode reaches 96.4%.