No abstract

No abstract

The dynamic stress-strain relationship of artificial frozen silty clay under one-dimensional coupled static and dynamic loads is obtained using modified split Hopkinson pressure bar (SHPB) equipment. The variation in dynamic compressive strength, dynamic deformation modulus, energy dissipation, and failure mode of artificial frozen silty clay with axial precompressive stress ratio are studied in this research. Experimental results indicate that the dynamic stress-strain curves under uniaxial state and one-dimensional coupled static and dynamic loads can be divided into four stages, i.e., compaction stage, elastic stage, plastic stage, and failure stage. The dynamic compressive strength, first-stage deformation modulus, second-stage deformation modulus, and absorbed energy density of artificial frozen silty clay present a trend of first increase and then decrease with the increase of axial compressive stress ratio, and the axial compressive stress ratio corresponding to the peak value is 0.7 in this test. In addition, there is a very similar effect of axial precompressive stress ratio on dynamic compressive strength and second-stage deformation modulus of artificial frozen silty clay. At 0.4 axial compressive stress ratio, spall phenomenon appears at circumferential direction and center position of the frozen soil specimen has no obvious failure. Shear failure appears at 0.7 to 0.9 axial compressive stress ratio, and the larger the axial compressive stress ratio applies, the more obvious the shearing surface appears; moreover, comminution failure mode appears at 1.0 axial compressive stress ratio.

Dynamic compressive tests are performed in three frozen soil types under different stress states at freezing temperatures of −5°C and −15°C with impact loading pressures from 0.3 MPa to 0.6 MPa. The effects of frozen soil type, freezing temperature, impact loading pressures, and stress states on incident energy and energy absorption characteristics, such as absorbed energy and energy absorbency rate, are investigated. The experimental results show that most of the incident energy is reflected back to the incident bar, and incident energy linearly increases with the increase of impact loading pressures. Both absorbed energy and energy absorbency rate are found to be negatively correlated with freezing temperature, and there values under confining pressure state are larger than that under uniaxial condition. The effects of confining pressure on absorbed energy are quite different at different freezing temperatures. In addition, frozen soil type also affects absorbed energy and energy absorbency rate. Meanwhile, impact loading pressure shows an increased effect on the absorbed energy, but it has little effect on energy absorbency rate in the research.

No abstract