Spin-polarized vertical-cavity surface-emitting lasers (spin-VCSELs) with birefringence-induced polarization oscillations have been proposed to generate desired photonic microwave signals. Here, we numerically investigate the generation of photonic microwave signals in an optically pumped quantum dot (QD) spin-VCSEL. First, the influence of intrinsic key parameters on period-one (P1) oscillations and microwave properties is discussed. Second, the difference between microwave generation based on the quantum well (QW) and QD spin-VCSELs is analyzed by controlling the carrier capture rate that is described in the spin-flip model. The QD spin-VCSEL shows superior microwave quality in the low-frequency range (e.g., 10 GHz~20 GHz) compared with the QW spin-VCSEL. Finally, to boost the performance of the generated photonic microwave signal, optical feedback is introduced. The results show that dual-loop feedback can simultaneously narrow the microwave linewidth and suppress the side modes that are derived from the external cavity mode.

Photonic microwave generation based on period-one (P1) dynamics of an optically pumped spin-polarized vertical-cavity surface-emitting laser (spin-VCSEL) is investigated numerically. Here, the frequency tunability of the photonic microwave generated from a free-running spin-VCSEL is demonstrated. The results show that the frequency of the photonic microwave signals can be widely tuned (from several gigahertz to hundreds of gigahertz) by changing the birefringence. Furthermore, the frequency of the photonic microwave can be modestly adjusted by introducing an axial magnetic field, although it degrades the microwave linewidth in the edge of Hopf bifurcation. To improve the quality of the photonic microwave, an optical feedback technique is employed in a spin-VCSEL. Under the scenario of single-loop feedback, the microwave linewidth is decreased by enhancing the feedback strength and/or delay time, whereas the phase noise oscillation increases with the increase of the feedback delay time. By adding the dual-loop feedback, the Vernier effect can effectively suppress the side peaks around the central frequency of P1, and simultaneously supports P1 linewidth narrowing and phase noise minimization at long times.