No abstract

No abstract

No abstract

This paper experimentally investigates the potential use of poplar sawdust as replacement material to sand in semi-dry concrete, manufactured by vibrocompaction and used in concrete masonry blocks. The substitution of sand by wood waste can relieve the scarcity of raw materials and lighten concrete masonry block weight. The introduction of a varying proportion (30, 40, 50 and 60 %) of poplar sawdust in the concrete has a significant influence on its thermophysical and mechanical behavior. The inhibition of hydration of cement with this poplar sawdust has a main influence. It affects the hydrates formed in the concrete and has an impact on the compressive strength at 7 days. This strength decreases significantly with increasing poplar sawdust proportion. But the method of concrete manufacturing by vibrocompaction increases the strength and could decrease the inhibitory effect of wood on the hydration reaction of the concrete. Substitution of 50 % of sand by poplar sawdust in the masonry concrete block manufactured by vibrocompaction is proposed. Indeed, this concrete composition gives similar mechanical strength to that of the conventional manufacture of masonry concrete block.

This paper introduces the explosion-protection performance of a kind of meshy aluminum alloy material in different blank rates and different packed densities. Experiment results show that this material has the best explosion-protection effect when the packed density between 30~35 kg/m3. When the packed density is fixed the pressure increase quickly with the increase of blank rate, the flame becomes smaller after filled with the material so this material can decrease the spread of flame. Besides we get the empirical equation of the packed density, blank rate and pressure.