No abstract

To date, organic solar cells (OSCs) with the development of photovoltaic materials have realized high power conversion efficiencies (PCEs) through the solution processing strategy with bulk heterojunction (BHJ) structure, but the BHJ morphology is difficult to control in large-scale fabrication of OSCs. Herein, we report an alternative film-forming technology known as layer-bylayer (LbL). As compared to its BHJ counterpart, LbL presents many unique advantages including controllable ''p-i-n'' morphology, good charge transport and extraction properties, and great universality. By using the LbL-bladed coating strategy, a high PCE of 16.35% was achieved in the PM6:Y6 OSCs. Notably, a large-area solar module of 11.52 cm 2 with a geometrical fill factor of over 90% exhibited an outstanding PCE of 11.86%, which represents the highest efficiency of large-area solar modules. The results may pave the way for the fabrication of the photoactive layer in the future industrial production of OSCs.

A synergic interface design is demonstrated for photostable inorganic mixed‐halide perovskite solar cells (PVSCs) by applying an amino‐functionalized polymer (PN4N) as cathode interlayer and a dopant‐free hole‐transporting polymer poly[5,5′‐bis(2‐butyloctyl)‐(2,2′‐bithiophene)‐4,4′‐dicarboxylate‐alt‐5,5′‐2,2′‐bithiophene] (PDCBT) as anode interlayer. First, the interfacial dipole formed at the cathode interface reduces the workfunction of SnO2, while PDCBT with deeper‐lying highest occupied molecular orbital (HOMO) level provides a better energy‐level matching at the anode, leading to a significant enhancement in open‐circuit voltage (Voc) of the PVSCs. Second, the PN4N layer can also tune the surface wetting property to promote the growth of high‐quality all‐inorganic perovskite films with larger grain size and higher crystallinity. Most importantly, both theoretical and experimental results reveal that PN4N and PDCBT can interact strongly with the perovskite crystal, which effectively passivates the electronic surface trap states and suppresses the photoinduced halide segregation of CsPbI2Br films. Therefore, the optimized CsPbI2Br PVSCs exhibit reduced interfacial recombination with efficiency over 16%, which is one of the highest efficiencies reported for all‐inorganic PVSCs. A high photostability with a less than 10% efficiency drop is demonstrated for the CsPbI2Br PVSCs with dual interfacial modifications under continuous 1 sun equivalent illumination for 400 h.

NiO is a promising hole transporting material for perovskite solar cells due to its high hole mobility, good stability, easy processibility, and suitable Fermi level for hole extraction. However, the efficiency of NiO‐based cells is still limited by the slow hole extraction due to the poor perovskite/NiO interface and the inadequate quality of the two solution‐processed material phases. Here, large influences of a monolayer surface modification of NiO nanocrystal layers with ethanolamine molecules are demonstrated on the enhancement of hole extraction/transport and thus the photovoltaic performance. The underlying causes have been revealed by a series of studies, pointing to a favorable dipole layer formed by the molecular adsorption along with the enhanced perovskite crystallization and the improved interface contact. Comparatively, the solar cells based on a diethanolamine‐modified NiO layer have achieved a rather high fill factor, indeed one of the highest among NiO‐based perovskite solar cells, and high short‐circuit photocurrent density (Jsc), resulting in a power conversion efficiency of ≈16%, most importantly, without hysteresis.

No abstract