Superhydrophobic surfaces are imperative in flexible polymer foams for diverse applications; however, traditional surface coatings on soft skeletons are often fragile and can hardly endure severe deformation, making them unstable and highly susceptible to cyclic loadings. Therefore, it remains a great challenge to balance their mutual exclusiveness of mechanical robustness and surface water repellency on flexible substrates. Herein, we describe how robust superhydrophobic surfaces on soft poly­(dimethylsiloxane) (PDMS) foams can be achieved using an extremely simple, ultrafast, and environmentally friendly flame scanning strategy. The ultrafast flame treatment (1–3 s) of PDMS foams produces microwavy and nanosilica rough structures bonded on the soft skeletons, forming robust superhydrophobic surfaces (i.e., water contact angles (WCAs) > 155° and water sliding angles (WSAs) < 5°). The rough surface can be effectively tailored by simply altering the flame scanning speed (2.5–15.0 cm/s) to adjust the thermal pyrolysis of the PDMS molecules. The optimized surfaces display reliable mechanical robustness and excellent water repellency even after 100 cycles of compression of 60% strain, stretching of 100% strain, and bending of 90° and hostile environmental conditions (including acid/salt/alkali conditions, high/low temperatures, UV aging, and harsh cyclic abrasion). Moreover, such flame-induced superhydrophobic surfaces are easily peeled off from ice and can be healable even after severe abrasion cycles. Clearly, the flame scanning strategy provides a facile and versatile approach for fabricating mechanically robust and surface superhydrophobic PDMS foam materials for applications in complex conditions.

No abstract

The recovery of precious metals like palladium (Pd) from secondary resources has enormous economic benefits and is in favor of resource reuse. In this work, we prepared a high efficiency pyridine-functionalized reduced graphene oxide (rGO) adsorbent for selective separation of Pd­(II) from simulated electronic waste leachate, by one-pot γ-ray radiation-induced simultaneous grafting polymerization (RIGP) of 4-vinylpyridine (4VP) from graphene oxide (GO) and reduction of GO. The poly­(4-vinylpyridine)-grafted reduced graphene oxide (rGO-g-P4VP) exhibits fast adsorption kinetics and high maximum adsorption capacity. The adsorption capacity is 105 mg g–1 in the first minute and reaches equilibrium within 120 min. The adsorption process follows the Langmuir model, from which the maximum adsorption capacity of Pd­(II) is estimated to be 177 mg g–1. We also proved that the adsorption mechanism of Pd­(II) on rGO-g-P4VP involves both ion exchange and coordination adsorption by XPS analysis. Most importantly, the loss of oxygen-containing groups due to reduction of GO not only facilitates the separation of adsorbent from aqueous solution but also reduces the electrostatic repulsion toward Pd­(II)­Cl4 2– in hydrochloric acid solution, leading to a higher adsorption selectivity of Pd­(II) over some common metal cations in electronic waste including Fe­(III), Cu­(II), and Al­(III) compared with poly­(4-vinylpyridine)-grafted graphene oxide (GO-g-P4VP) prepared by atom transfer radical polymerization. Other precious metals like Pt­(IV) and Au­(III) can also be recovered easily and selectively by rGO-g-P4VP. This work demonstrates that rGO-g-P4VP prepared by the facile RIGP is a promising adsorbent for recovery of precious metals from secondary resources like electronic waste leachate.

No abstract

No abstract