No abstract

Fissure density is an important evaluation indicator of the degree of fissure development for fissure soils, which is not easily measured by traditional methods. A new statistical method based on Visual Basic programming was proposed to calculate fissure density. The basic principle of this method is to convert colour pixels into black-white pixels based on brightness calculation, and then calculate the fissure density according to the proportion of black-white pixels. Through the above methods, the statistics of the fissure density and fissure area of shrinkage soil sample can be realized.

Completely weathered phyllite (CWP) has the characteristics of difficult compaction, low shear strength after compaction and large settlement after construction. The traditional improvement method using a single agent of red clay or cement for CWP satisfies the subgrade requirements for ordinary railway, but cannot meet the requirements of immediate strength and long-term post-construction settlement of high-speed railway at the same time. A series of experimental investigations were undertaken for the blended CWP soils, with three additives used. The first additive was red clay, the second was cement and the third was a combination of both red clay and cement at various portions. Results of consolidation test and shear strength test carried out for the treated CWP soils show that: 1) The effect of cement on improving the compression modulus of CWP is much better than that of red clay; 2) The settlement of an embankment of 10 m high formed by blended soil of CWP with 3% cement can be controlled within 15 mm, while the settlement will be 25.15 mm for the same embankment of blended soil of CWP with 40% red clay; 3) The shear strength and ultimate bearing capacity of CWP improved by red clay are much better than those of 5% cement; 4) The ultimate bearing capacity of CWP improved by 40% red clay is 3.42 times of that by 3% cement and 2.95 times by 5% cement. Furthermore, the bearing capacity of CWP when improved by red clay can meet railway subgrade requirements immediately after compaction, while cement improved CWP needs a curing time of 1 day or longer. This is an impediment to rapid construction process. The improvement mechanism of red clay is mainly filling effect and grading improvement effect, while the improvement mechanism of cement is mainly hardening reaction, which produces high strength material to cement. It is found that 40% red clay and 3% cement treated CWP, which is considered to be optimum, can meet the subgrade requirements of both immediate bearing capacity and long-term post-construction settlement for the high-speed railway.

Phyllite soil has low bearing capacity and can not meet the mechanical properties of subgrade, so it is proposed to use special soil (red clay) to reinforce and improve phyllite soil. The shear strength indexes of unsaturated and saturated mixed soil were obtained by shear strength tests, and the ultimate bearing capacity calculation model was established based on shear strength indexes and plate load test. The calculation results show that the reduction of the ultimate bearing capacity can exceed 50% after saturation. According to the detection indexes of foundation coefficient (K 30) and the requirement of medium and long-term bearing capacity in the subgrade code, the minimum blending ratio of red clay in different filling layers of subgrade was obtained through comparison, which can provide a basis for improving special soil with special soil.