High-performance electromagnetic interference (EMI) shielding materials with ultraflexibility, outstanding mechanical properties, and superior EMI shielding performances are highly desirable for modern integrated electronic and telecommunication systems in areas such as aerospace, military, artificial intelligence, and smart and wearable electronics. Herein, ultraflexible and mechanically strong aramid nanofiber−Ti 3 C 2 T x MXene/silver nanowire (ANF-MXene/AgNW) nanocomposite papers with double-layered structures are fabricated via the facile two-step vacuum-assisted filtration followed by hot-pressing approach. The resultant doublelayered nanocomposite papers with a low MXene/AgNW content of 20 wt % exhibit an excellent electrical conductivity of 922.0 S•cm −1 , outstanding mechanical properties with a tensile strength of 235.9 MPa and fracture strain of 24.8%, superior EMI shielding effectiveness (EMI SE) of 48.1 dB, and high EMI SE/t of 10 688.9 dB•cm −1 , benefiting from the highly efficient double-layered structures, high-performance ANF substrate, and extensive hydrogen-bonding interactions. Particularly, the nanocomposite papers show a maximum electrical conductivity of 3725.6 S•cm −1 and EMI SE of ∼80 dB at a MXene/AgNW content of 80 wt % with an absorption-dominant shielding mechanism owing to the massive ohmic losses in the highly conductive MXene/AgNW layer, multiple internal reflections between Ti 3 C 2 T x MXene nanosheets and polarization relaxation of localized defects, and abundant terminal groups. Compared with the homogeneously blended ones, the double-layered nanocomposite papers possess greater advantages in electrical, mechanical, and EMI shielding performances. Moreover, the multifunctional double-layered nanocomposite papers exhibit excellent thermal management performances such as high Joule heating temperature at low supplied voltages, rapid response time, sufficient heating stability, and reliability. The results indicate that the double-layered nanocomposite papers have excellent potential for high-performance EMI shielding and thermal management applications in aerospace, military, artificial intelligence, and smart and wearable electronics.

High-performance and rapid response electrical heaters with ultraflexibility, superior heat resistance, and mechanical properties are highly desirable for the development of wearable devices, artificial intelligence, and high-performance heating systems in areas such as aerospace and the military. Herein, a facile and efficient two-step vacuum-assisted filtration followed by hot-pressing approach is presented to fabricate versatile electrical heaters based on the high-performance aramid nanofibers (ANFs) and highly conductive Ag nanowires (AgNWs). The resultant ANF/AgNW nanocomposite papers present ultraflexibility, extremely low sheet resistance (minimum R s of 0.12 Ω/sq), and outstanding heat resistance (thermal degradation temperature above 500 °C) and mechanical properties (tensile strength of 285.7 MPa, tensile modulus of 6.51 GPa with a AgNW area fraction of 0.4 g/m2), benefiting from the partial embedding of AgNWs into the ANF substrate and the extensive hydrogen-bonding interactions. Moreover, the ANF/AgNW nanocomposite paper-based electrical heaters exhibit satisfyingly high heating temperatures (up to ∼200 °C) with rapid response time (10–30 s) at low AgNW area fractions and supplied voltages (0.5–5 V) and possess sufficient heating reliability, stability, and repeatability during the long-term and repeated heating and cooling cycles. Fully functional applications of the ANF/AgNW nanocomposite paper-based electrical heaters are demonstrated, indicating their excellent potential for emerging electronic applications such as wearable devices, artificial intelligence, and high-performance heating systems.

In order to ensure the operational reliability and information security of sophisticated electronic components and to protect human health, efficient electromagnetic interference (EMI) shielding materials are required to attenuate electromagnetic wave energy. In this work, the cellulose solution is obtained by dissolving cotton through hydrogen bond driving self-assembly using sodium hydroxide (NaOH)/urea solution, and cellulose aerogels (CA) are prepared by gelation and freeze-drying. Then, the cellulose carbon aerogel@reduced graphene oxide aerogels (CCA@rGO) are prepared by vacuum impregnation, freeze-drying followed by thermal annealing, and finally, the CCA@rGO/polydimethylsiloxane (PDMS) EMI shielding composites are prepared by backfilling with PDMS. Owing to skin-core structure of CCA@rGO, the complete three-dimensional (3D) double-layer conductive network can be successfully constructed. When the loading of CCA@rGO is 3.05 wt%, CCA@rGO/PDMS EMI shielding composites have an excellent EMI shielding effectiveness (EMI SE) of 51 dB, which is 3.9 times higher than that of the co-blended CCA/rGO/PDMS EMI shielding composites (13 dB) with the same loading of fillers. At this time, the CCA@rGO/PDMS EMI shielding composites have excellent thermal stability (THRI of 178.3 °C) and good thermal conductivity coefficient (λ of 0.65 W m-1 K-1). Excellent comprehensive performance makes CCA@rGO/PDMS EMI shielding composites great prospect for applications in lightweight, flexible EMI shielding composites. Graphic abstract

With the widespread application of electronic communication technology, the resulting electromagnetic radiation pollution has been significantly increased. Metal matrix electromagnetic interference (EMI) shielding materials have disadvantages such as high density, easy corrosion, difficult processing and high price, etc. Polymer matrix EMI shielding composites possess light weight, corrosion resistance and easy processing. However, the current polymer matrix composites present relatively low electrical conductivity and poor EMI shielding performance. This review firstly discusses the key concept, loss mechanism and test method of EMI shielding. Then the current development status of EMI shielding materials is summarized, and the research progress of polymer matrix EMI shielding composites with different structures is illustrated, especially for their preparation methods and evaluation. Finally, the corresponding key scientific and technical problems are proposed, and their development trend is also prospected. "Image missing"

Lightweight, compressible and highly sensitive pressure/strain sensing materials are highly desirable for the development of health monitoring, wearable devices and artificial intelligence. Herein, a very simple, low-cost and solution-based approach is presented to fabricate versatile piezoresistive sensors based on conductive polyurethane (PU) sponges coated with synergistic multiwalled carbon nanotubes (MWCNTs) and graphene. These sensor materials are fabricated by convenient dip-coating layer-by-layer (LBL) electrostatic assembly followed by in situ reduction without using any complicated microfabrication processes. The resultant conductive MWCNT/RGO@PU sponges exhibit very low densities (0.027-0.064 g cm-3), outstanding compressibility (up to 75%) and high electrical conductivity benefiting from the porous PU sponges and synergistic conductive MWCNT/RGO structures. In addition, the MWCNT/RGO@PU sponges present larger relative resistance changes and superior sensing performances under external applied pressures (0-5.6 kPa) and a wide range of strains (0-75%) compared with the RGO@PU and MWCNT@PU sponges, due to the synergistic effect of multiple mechanisms: "disconnect-connect" transition of nanogaps, microcracks and fractured skeletons at low compression strain and compressive contact of the conductive skeletons at high compression strain. The electrical and piezoresistive properties of MWCNT/RGO@PU sponges are strongly associated with the dip-coating cycle, suspension concentration, and the applied pressure and strain. Fully functional applications of MWCNT/RGO@PU sponge-based piezoresistive sensors in lighting LED lamps and detecting human body movements are demonstrated, indicating their excellent potential for emerging applications such as health monitoring, wearable devices and artificial intelligence.