Ordered mesoporous silicas such as micelle-templated silicas (MTS) feature unique textural properties in addition to their high surface area (approximately 1000 m2/g): narrow mesopore size distributions and controlled pore connectivity. These characteristics are highly relevant to chromatographic applications for resistance to mass transfer, which has never been studied in chromatography because of the absence of model materials such as MTS. Their synthesis is based on unique self-assembly processes between surfactants and silica. In order to take advantage of the perfectly adjustable texture of MTS in chromatographic applications, their particle morphology has to be tailored at the micrometer scale. We developed a synthesis strategy to control the particle morphology of MTS using the concept of pseudomorphic transformation. Pseudomorphism was recognized in the mineral world to gain a mineral that presents a morphology not related to its crystallographic symmetry group. Pseudomorphic transformations have been applied to amorphous spherical silica particles usually used in chromatography as stationary phases to produce MTS with the same morphology, using alkaline solution to dissolve progressively and locally silica and reprecipitate it around surfactant micelles into ordered MTS structures. Spherical beads of MTS with hexagonal and cubic symmetries have been synthesized and successfully used in HPLC in fast separation processes. MTS with a highly connected structure (cubic symmetry), uniform pores with a diameter larger than 6 nm in the form of particles of 5 microm could compete with monolithic silica columns. Monolithic columns are receiving strong interest and represent a milestone in the area of fast separation. Their synthesis is a sol-gel process based on phase separation between silica and water, which is assisted by the presence of polymers. The control of the synthesis of monolithic silica has been systematically explored. Because of unresolved yet cladding problems to evaluate the resulting macromonoliths in HPLC, micromonoliths were synthesized into fused-silica capillaries and evaluated by nano-LC and CEC. Only CEC allows to gain high column efficiencies in fast separation processes. Capillary silica monolithic columns represent attractive alternatives for miniaturization processes (lab-on-a chip) using CEC.

The synthesis of large-pore micelle-templated silica (MTS) materials as discrete spheres by pseudomorphic synthesis solves the double challenge: enlarging the pore size of MTS beyond the diameter of the micelles and controlling the morphology and the size of the particles. The pseudomorphic transformation of silica beads of the desired size into MTS is one of the more suitable routes to control both nanometric and micrometric scales of MTS synthesis. The most employed method to enlarge pore diameter of MTS synthesized from alkyltrimethylammonium surfactants is to use 1,3,5-trimethylbenzene (TMB) as a swelling agent in the micelles. Unfortunately this method leads to particle aggregation. By means of the pseudomorphic route combining an original set of chemical compositions (C 18 TAB/decane/ TMB/NaI), under mild conditions (low temperature, without autoclaving), we successfully synthesized nonaggregated MTS beads of 10 µm with pore diameter ranging from 7 to 9 nm, 900 m 2 /g specific surface area, and 1.5 mL/g pore volume. To accommodate the large pore volume developed by largepore MTS, highly porous silica beads of 10 µm and 300 m 2 /g specific surface area have previously been synthesized by means of an emulsion/polymerization procedure. The control at nanometric scale, by means of surfactants, leads to improved textural properties compared to optimized silica gels, whereas the control of the micrometric morphology (discrete spheres) makes these supports suitable for column packing and chromatographic evaluation.

Highly ordered mesoporous silicas such as, mobile composition of matter, MCM-41, MCM-48, and the SBA-types of materials have helped to a large extent to understand the formation mechanisms of the pore structure of adsorbents and to improve the methods of pore structural characterization. It still remains an open question whether the high order, the regularity of the pore system, and the narrow pore size distribution of the materials will lead to a substantial benefit when these materials are employed in liquid phase separation processes. MCM-41 type 10 microm beads are synthesized following the route of pseudomorphic transformation of highly porous amorphous silicas. Highly porous silicas and the pseudomorphically transformed derivatives are characterized by nitrogen sorption at 77 K and by inverse size-exclusion chromatography (ISEC) employing polystyrene standards. Applying the network model developed by Grimes, we calculated the pore connectivity n(T) of the materials. The value of n(T) varies between the percolation threshold of the lattice and values of n(T) > 10, the latter being the limiting value above which the material can be considered to be almost infinitely connected such that the ISEC behavior of the material calculated with the pore network model is the same when calculated with a parallel pore model which assumes an infinite connectivity. One should expect that the pore connectivity is reflected in the column performance, when these native and unmodified materials are packed into columns and tested with low molecular weight analytes in the Normal Phase LC mode. As found in a previous study on monolithic silicas and highly porous silicas, the slope of the plate height (HETP) - linear velocity (u) curve decreased significantly with enhanced pore connectivity of the materials. First results on the pseudomorphically transformed MCM-41 type silicas and their highly porous amorphous precursors showed that (i) the transformation did not change the pore connectivity (within the limits detectable by ISEC) from the starting material to the final product and (ii) the slope of the HETP versus u curve for dibutylphtalate did not change significantly after the pseudomorphic transformation.