In order to analyze
pyrolysis performance and energy balance of
corn stover pyrolysis, a poly-generation pyrolysis unit that coproduced
biochar, pyrolysis gas, and liquids was used. Corn stover was naturally
dried and crushed to lengths of 4–7 mm before pyrolysis at
450, 550, and 650 °C. The physical and chemical properties, yield
rate, and influence of technological parameters were analyzed. In
addition, a full energy balance analysis was carried out. The results
show that the quality of corn stover char was primarily affected by
pyrolysis temperature and material residence time, where a residence
time of at least 30 min was required for conversion in this unit.
The higher heating value (HHV) of pyrolysis gases reached ∼20
MJ/Nm3 at pyrolysis temperatures of 550 and 650 °C,
providing a useful gaseous fuel. In terms of energy balance, biochar
contributing 47.88% accounted for most of the enthalpy of products,
followed by pyrolysis gas (36.17%), wood tar (13.14%), and light oil
(1.74%), and the last fraction, wood vinegar, accounted for only ∼1.07%
of the total product enthalpy. The theoretical energy efficiency of
the poly-generation system was 82.1%. Pyrolysis at temperatures of
550 and 650 °C could provide fuel gases that contained enough
energy to support the heating requirements of the system. The researcher
offers an important new direction for comprehensive development of
straw utilization for energy and materials, not only in China, but
worldwide.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.