Black phosphorus is a two-dimensional material of great interest, in part because of its high carrier mobility and thickness dependent direct bandgap. However, its instability under ambient conditions limits material deposition options for device fabrication. Here we show a black phosphorus ink that can be reliably inkjet printed, enabling scalable development of optoelectronic and photonic devices. Our binder-free ink suppresses coffee ring formation through induced recirculating Marangoni flow, and supports excellent consistency (< 2% variation) and spatial uniformity (< 3.4% variation), without substrate pre-treatment. Due to rapid ink drying (< 10 s at < 60 °C), printing causes minimal oxidation. Following encapsulation, the printed black phosphorus is stable against long-term (> 30 days) oxidation. We demonstrate printed black phosphorus as a passive switch for ultrafast lasers, stable against intense irradiation, and as a visible to near-infrared photodetector with high responsivities. Our work highlights the promise of this material as a functional ink platform for printed devices.

Spectrometers with ever-smaller footprints are sought after for a wide range of applications in which minimized size and weight are paramount, including emerging in situ characterization techniques. We report on an ultracompact microspectrometer design based on a single compositionally engineered nanowire. This platform is independent of the complex optical components or cavities that tend to constrain further miniaturization of current systems. We show that incident spectra can be computationally reconstructed from the different spectral response functions and measured photocurrents along the length of the nanowire. Our devices are capable of accurate, visible-range monochromatic and broadband light reconstruction, as well as spectral imaging from centimeter-scale focal planes down to lensless, single-cell–scale in situ mapping.

Spectroscopic analysis is one of the most widely used analytical tools in scientific research and industry. Although laboratory benchtop spectrometer systems offer superlative resolution and spectral range, their miniaturization is crucial for applications where portability is paramount or where in situ measurements must be made. Advancement in this field over the past three decades is now yielding microspectrometers with performance and footprint near those viable for lab-on-a-chip systems, smartphones, and other consumer technologies. We summarize the technologies that have emerged toward achieving these aims—including miniaturized dispersive optics, narrowband filter systems, Fourier transform interferometers, and reconstructive microspectrometers—and discuss the challenges associated with improving spectral resolution while device dimensions shrink ever further.

We report a general approach to light-emitting polymer nanofibers (PNFs) based on waveguiding excitation. By waveguiding excitation light along the PNFs, we demonstrated that the interaction of light with PNFs is enhanced over 3 orders of magnitude compared with the currently used irradiating excitation. Intriguing advantages such as enhanced excitation efficiency, low excitation power operation down to nW levels, tightly confined excitation with low cross talk, and high photostability of the light-emitting PNFs are obtained. The waveguiding excitation allows incorporation of various fluorescent dyes into PNFs to generate multicolor emitting sources covering the entire visible spectrum. The light-emitting single PNFs via waveguiding excitation may find widespread nanophotonic applications in chemical and biological sensors, multicolor emitting sources, and lasers.