Road extraction in remote sensed images using stochastic geometry framework AIP Conf. Proc. 568, 531 (2001); 10.1063/1.1381915 SWUIS-A compact astronomical UV/VIS/IR imaging system for manned space-based platforms including the space shuttle and the international space station AIP Conf.

We present a series of results acquired at a 2-kilometer distance using our lidar system under several weather conditions, clear, cloudy, light rain, moderately foggy, and night. The experimental results show that ghost imaging lidar via spar-sity constraints can realize imaging in all these weather conditions.

Three-dimensional ghost imaging LiDAR via sparsity constraint (3D GISC LiDAR), as a staring imaging method, can obtain both the range information and spatial distribution of a remote target with a single-pixel time-resolved detector. However, previous demonstrations mainly focused on the relatively static scene in visible light. Here we propose an airborne near infrared 3D GISC LiDAR system and airborne high-resolution imaging is implemented. Experimental results show that an image with 0.48 m horizontal resolution as well as 0.5 m range resolution at approximately 1.04 km height can be achieved. Some considerations on the improvement of this LiDAR system are also discussed.

International audienceThe upward oil migration in a transparent and rough fracture containing a liquid of higher density is studied experimentally using a light transmission technique. The aperture heterogeneity is also measured by light transmission. The injection of oil in a fracture containing a heavier fluid produces a gravitational fingering instability. Depending on the injection velocity (capillary number, Ca) and the density difference between the two fluids (Bond number, Bo), different patterns are observed during the oil displacements. The width of the finger and its velocity are measured as a function of Bo and Ca. A stability analysis of the interface, based on a generalised Darcy equation in a two-dimensional fracture, allows an accurate description of the experimental results. The order of magnitude of the finger width and its velocity are in good agreement with the calculations, with small disparities due to various unknown fluid flow parameters: capillary pressure, finger thickness in the gap of the fracture, finger tortuosity and oil velocity field into the finger. The theoretical approach allows constructing a (Ca, Bo) phase diagram of stability of the interface