Abstract. The paper presents experimental results of a physical simulation and computations of aerodynamic and thermal interference of turbulent flows over two building models. The experimental setup, conditions, and results are described, and the evaluation of obtained results is given in this paper. Conclusions are drawn on the basis of this research.

No abstract

The article presents the results of experimental studies on the change in heat losses along the height of the model when blowing a system of building models in the form of two square prisms depending on their relative position with airflow.

The paper considers the dynamic and thermal interference effects on two neighbouring building models in the form of square prisms arranged at a short distance from each other. It is shown how relative positions of the models affect the specific phenomena caused by the airflow interactions.The aim of this paper is to experimentally study the dynamic and thermal interference of a tandem of two building models in the form of square prisms depending on their relative position.The phenomenon of wind loads on buildings and structures has always attracted great interest among engineers and researchers. With the accumulation of knowledge and technical capabilities, the potential for likely ways to study wind flows and their impact on different objects increased. In recent years, the world science has accumulated an extensive knowledge base on wind impacts on objects of various shapes, such as prisms, pyramids, cylinders, etc. Studies are carried out for their mutual impact of several objects on changes in both the wind load and heat exchange. Their mutual effect on the air motion and turbulence is considered.There are two main areas in the field of the wind impact. The first impact is the force load on building, the second is the wind as a source of convective heat exchange. The object of this study is the interference parameters allowing to assess the influence on the field of pressure and heat recoil of disturbances evoked in front of the barriers.At the first stage, physical models help to study the pressure field on different facets and ratios of the local and medium heat exchange under the forced convection conditions. The next step is to jointly consider the wind (dynamic) load and heat flows, attempting to detect the total contribution to changes depending on the reciprocal model arrangement. All experiments are performed in the aerodynamic tube, at the TSUAB department. It is shown that the dynamic and thermal interference ratios vary greatly in two building models. At the same time, the thermal interference is very conservative compared to the dynamic. Using the interference parameters, it is easy to analyze the extreme pressure and the heat flow on the model surface depending on a large number of factors, including their arrangement.