Introduction. The article is devoted to a current issue of improving the quality of road surface cleaning and increasing the resource of brush working equipment. Improving the quality of cleaning and the resource of the brush working equipment will reduce the cost of operating a communal machine. In the process of operation, the pile of the cylindrical brush is worns out, while its elastic characteristics change, which is reflected in the required pressing force to maintain the most favorable value of the width of the contact spot from the condition of ensuring high quality cleaning and minimal intensity of pile wear.Materials and methods. The results of studies of the interaction of the pile of a cylindrical brush with the surface to be cleaned are presented at various degrees of wear of the brush pile. The research results are presented in analytical and graphical forms. The calculations were carried out using the Microsoft Excel software product and the Mathkad software environment for mathematical calculations.Results. The paper shows the dependence of the degree of wear of the pile of the brush working equipment on the actual radius of the cylindrical brush. The relationship between the width of the contact spot and the deformation of the cylindrical brush at different degrees of wear and tear is shown as a graph.The influence of the degree of wear on the elastic characteristics of the brush working equipment is considered. The dependences of the average stiffness coefficient on the degree of wear of the pile of a cylindrical brush, as well as the required pressing force on the degree of wear at different values of the width of the contact patch of the cylindrical brush are given.