This article presents the application of amperometric biosensors based on platinum printed electrodes SensLab and immobilized enzymes, alcohol oxidase, glucose oxidase, and lactate oxidase, for wine analysis. Created devices demonstrate linear response to ethanol, glucose, and lactate within the concentration range 0.3-20 mM, 0.04-2.5 mM, and 0.008-1 mM, respectively. No decrease in ethanol and glucose biosensor activity is revealed during 2 months after fabrication, and the operational stability of the lactate biosensor is sufficient only during 4 days. Developed biosensors showed high selectivity to the substrate and are successfully applied to the analysis of such complex mixtures as wine and must. Good correlation of the results of analysis of different wines and must obtained by amperometric biosensors with immobilized oxidases and traditional methods is shown. Created biosensors can be used as a basis of a commercial device for express analysis of ethanol, glucose, and lactate in wine and must during its fermentation. Application of such devices for quality control in foodstuff industry can have great economical effect because determination by biosensors is less expensive, labor-intensive, and lengthy than traditional methods of analysis.

MADICA 2006 Conference, Fifth Maghreb-Europe Meeting on Materials and their Applicatons for Devices and Physical, Chemical and Biological Sensors, MADICA 2006 Conference, Fifth Maghreb-Europe Meeting on Materials and their Applicatons for Devices and Physical, Chemical and Biological SensorsInternational audienceA lactate oxidase-based amperometric biosensor is designed for lactate determination. Two methods of lactate oxidase immobilization on the surface of commercial SensLab platinum printing electrodes are compared. The sensor with lactate oxidase immobilized by physical adsorption in Resydrol polymer is shown to have both narrower dynamic range (0.004–0.5 mМ lactate) and higher sensitivity (320 nA/mM) as compared with that immobilized in poly(3,4-ethylenedioxythiophene) by electrochemical polymerization (0.05–1.6 mM and 60 nA/mM respectively). The operational stability of the biosensors developed is studied; the immobilization method is shown to be of no influence. The lactate content in wine and in wine material during fermentation is analyzed. The data obtained by amperometric lactate biosensor correlated with those of standard chromatography. The biosensor developed can be used in food industry for control and optimization of process of wine fermentation as well as for control of wine quality