Demonstrating improved confinement of energetic ions is one of the key goals of the Wendelstein 7-X (W7-X) stellarator. In the past campaigns, measuring confined fast ions has proven to be challenging. Future deuterium campaigns would open up the option of using fusion-produced neutrons to indirectly observe confined fast ions. There are two neutron populations: 2.45 MeV neutrons from thermonuclear and beam-target fusion, and 14.1 MeV neutrons from DT reactions between tritium fusion products and bulk deuterium. The 14.1 MeV neutron signal can be measured using a scintillating fiber neutron detector, whereas the overall neutron rate is monitored by common radiation safety detectors, for instance fission chambers. The fusion rates are dependent on the slowing-down distribution of the deuterium and tritium ions, which in turn depend on the magnetic configuration via fast ion orbits. In this work, we investigate the effect of magnetic configuration on neutron production rates in W7-X. The neutral beam injection, beam and triton slowing-down distributions, and the fusion reactivity are simulated with the ASCOT suite of codes. The results indicate that the magnetic configuration has only a small effect on the production of 2.45 MeV neutrons from DD fusion and, particularly, on the 14.1 MeV neutron production rates. Despite triton losses of up to 50 %, the amount of 14.1 MeV neutrons produced might be sufficient for a time-resolved detection using a scintillating fiber detector, although only in high-performance discharges.

After completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3  ×  1019 m−3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.

The behaviour of the fast particle population during 18 keV hydrogen and 26 keV deuterium neutral beam injection in deuterium plasmas is investigated. Experiments reveal large fast ion losses. The experimental results are confirmed using different types of modelling: simulation using the NUBEAM module, solution of the Boltzmann kinetic equation and solution of the 3D fast ion tracking algorithm. The dynamics of the energetic particle redistribution and losses during sawtooth oscillation and toroidal Alfvén eigenmodes are studied. A method to decrease fast ion losses under the current conditions (0.4 T, 0.2 MA) is shown. The influence of the plasma parameters on the energetic ion confinement rate is investigated. Modelling for the Globus-M2 conditions (1 T, 0.5 MA) is performed.

The existing Globus-M machine [1] is a low aspect ratio compact tokamak (R = 0.36 m, a = 0.24 m) with high specific ohmic and auxiliary heating power. First plasma was achieved in Globus-M in 1999. The machine has demonstrated practically all of the project objectives ever since. Target design parameters (aspect ratio-1.5, 2 − X-point configuration, vertical elongation-2.2, traiangularity-0.45, average density-1.0•10 20 m −3 , plasma current-0.3 MA, toroidal beta-12%, auxiliary heating power-1 MW) [2] were achieved and some of them overcame [3,4]. Also Globus-M

No abstract