The boundary integral method for propagating solid/liquid interfaces is detailed with allowance for the thermo-solutal Stefan-type models. Two types of mass transfer mechanisms corresponding to the local equilibrium (parabolic-type equation) and local non-equilibrium (hyperbolic-type equation) solidification conditions are considered. A unified integro-differential equation for the curved interface is derived. This equation contains the steady-state conditions of solidification as a special case. The boundary integral analysis demonstrates how to derive the quasi-stationary Ivantsov and Horvay-Cahn solutions that, respectively, define the paraboloidal and elliptical crystal shapes. In the limit of highest Péclet numbers, these quasi-stationary solutions describe the shape of the area around the dendritic tip in the form of a smooth sphere in the isotropic case and a deformed sphere along the directions of anisotropy strength in the anisotropic case. A thermo-solutal selection criterion of the quasi-stationary growth mode of dendrites which includes arbitrary Péclet numbers is obtained. To demonstrate the selection of patterns, computational modelling of the quasi-stationary growth of crystals in a binary mixture is carried out. The modelling makes it possible to obtain selected structures in the form of dendritic, fractal or planar crystals.This article is part of the theme issue 'From atomistic interfaces to dendritic patterns'.

This article is devoted to the study of the tip shape of dendritic crystals grown from a supercooled liquid. The recently developed theory (Alexandrov & Galenko 2020 Phil. Trans. R. Soc. A 378 , 20190243. ( doi:10.1098/rsta.2019.0243 )), which defines the shape function of dendrites, was tested against computational simulations and experimental data. For a detailed comparison, we performed calculations using two computational methods (phase-field and enthalpy-based methods), and also made a comparison with experimental data from various research groups. As a result, it is shown that the recently found shape function describes the tip region of dendritic crystals (at the crystal vertex and some distance from it) well. This article is part of the theme issue ‘Transport phenomena in complex systems (part 1)’.

This review article summarizes current theories of the steady-state growth mode of dendrites in the form of elliptical paraboloids. The shape of dendrite tips is analyzed, temperature and solute concentration distributions are described in its vicinity, and a solution of the hydrodynamic problem of a viscous incompressible fluid flowing against a dendrite tip is developed. A significant difference in analytical solutions describing a dendrite tip as an elliptic paraboloid as compared to an axisymmetric morphology is shown. The system of nonlinear equations for determining the stationary velocity of dendrite growth and the radii of curvature of the dendrite tip along the major and minor axis of the ellipse, respectively, is derived. The developed theory is compared with experimental data on the growth of ice crystals consisting of D2O or H2O.

The boundary integral method is developed for unsteady solid/liquid interfaces propagating into undercooled binary liquids with convection. A single integrodifferential equation for the interface function is derived using the Green function technique. In the limiting cases, the obtained unsteady convective boundary integral equation (CBIE) transforms into a previously developed theory. This integral is simplified for the steady-state growth in arbitrary curvilinear coordinates when the solid/liquid interface is isothermal (isoconcentration). Finally, we evaluate the boundary integral for a binary melt with a forced flow and analyze how the melt undercooling depends on P\'eclet and Reynolds numbers.

No abstract