A 1.2-V 90-nm Fully Integrated Compact CMOS Linear Power Amplifier Using the Coupled L-Shape Concentric Vortical Transformer

Abstract

This paper presents a 90-nm fully integrated CMOS linear power amplifier (PA) using a coupled L-shape concentric vortical transformer (CL-CVT) for the fourth-generation long-term evolution (LTE) communication standard. Using the proposed output combining CL-CVT architecture, the outer diameter required by the power combiner is reduced by 66% compared to the distributed active transformer with similar performance. Moreover, the PA is able to efficiently combine four push-pull output stages and achieve nearly constant power over several LTE bands with a total chip area less than 1 mm . With a 1.2-V supply voltage, the PA delivers 27.3-dBm maximum output power with a peak drain efficiency of 47% at 2.4 GHz. Using a 20-MHz LTE 16-QAM test signal, the PA achieves 24.6% power-added efficiency at an output power level of 22 dBm and passes the spectral requirements defined by the LTE standard without using any pre-distortion or calibration techniques. Index Terms-CMOS power amplifier (PA), fourth generation (4G), linear, long-term evolution (LTE), power combiner, transformer, wideband.0018-9480

A Cmos Power Amplifier Using a Balun Embedded Driver Stage for Ieee 802.11N Wlan Applications

“…Although the linearity and breakdown voltage of CMOS amplifiers are lower than those of HBT amplifiers, various techniques to overcome the weaknesses of the CMOS process have been studied. For example, a distributed active transformer (DAT) can be introduced to overcome the low breakdown voltage of CMOS and thereby successfully generate watt-level output power using CMOS power amplifiers [17,18]. Accordingly, the good functionality of CMOS power amplifiers has been successfully proved through various meaningful studies.…”

A Cmos Power Amplifier Using an Asymmetrical Input Transformer to Enhance the Gain for Ieee 802.11N Wlan Applications

“…More recently, many studies related to CMOS power amplifiers have been conducted with fully integrated RF systems in an effort to reduce the unit cost of production [6][7][8][9][10]. Although low breakdown voltages and nonlinear characteristics of CMOS devices have been regarded as obstacles in the designs of power amplifiers using the CMOS process, many useful techniques which can be used to overcome the problems associated with CMOS power amplifiers have been introduced and published [11][12][13][14][15][16].…”